Bedienungsanleitung Ferm CRM1030 FCO-2050 (Seite 7 von 50) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

538650

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Ferm 07

• Check that the tank is fully decompressed before connections with the tank are

unscrewed.

• It is prohibited to make holes in, or welds to, or purposely to distort the compressed air tank.

• Do not perform any actions on the compressor without first having taken the plug out of the

plug socket.

• Do not aim water jets or jets of flammable liquids at the compressor.

• Do not place flammable objects near the compressor.

• Switch the pressure regulator to the "0" position (OFF = uit) during dwell time.

• Never aim the air jet at persons or animals (fig. 20).

• Do not transport the compressor with the tank pressurised.

• N.B.: some parts of the compressor such as the head and the feed-through pipes may

reach high temperatures. Do not touch these parts to avoid burns (fig. 12-13).

• Transport the compressor by lifting it or by using the special grips or handles (fig. 5-6).

• Children and animals should be kept far away from the area of operation of the machine.

• If you use the compressor to spray paint:

a) Do not work in enclosed spaces or near naked flames.

b) Make sure that the environment in which you will be working has dedicated ventilation.

c) Protect your nose and mouth with a dedicated mask (fig. 21).

• Do not use the compressor when the electrical cable or the plug is damaged, and instruct

an authorised Support Service to replace them with an original part.

• When the compressor is placed on a surface higher than the floor, it should be secured to

prevent it from falling down during operation.

• Do not put objects or your hands in the protective covers to avoid physical damage and

damage to the compressor.

• Do not use the compressor as a blunt instrument against persons, objects or animals in

order to prevent serious damage.

• If the compressor is no longer in use, always take the plug out of the plug socket.

• Always make sure that compressed-air hoses are used for compressed air and which are

characterised by a maximum pressure adjusted to that of the compressor. Do not try to

repair the hose if it is damaged.

Electrical safety

Earthing regulations

This compressor has to be earthed while in use in order to protect the operator against electrical

shocks. The compressor is provided with a two-core cable plus an earth. The electrical

connection has to be made by a qualified technician. We recommend never disassembling the

compressor and neither making any other connections into the pressure regulator. Repairs

should be carried out by authorised Support Services or by other qualified centres.

Never forget that the earthing core is the green or the yellow/green wire. Never

connect this green wire to a terminal under load.

Before replacing the plug of the feed, make sure that the earth cable is connected. If in doubt,

please call in a qualified electrician and have the earthing checked.

FIN

Ferm

KONFORMITETSERKLÆRING (DK)

Vi erklærer at under almindeligt ansvar, at dette produkt er i overenstemmelse med følgende

normer eller normative dokumenter:

EN1012-1, EN55014-1, ISO5388, EN55014-2, EN61000-3-2, EN61000-3-3

ioverensstemmelse med direktiverne:

98/37/EC, 73/23/EEC, 89/336/EEC, 87/404/EEC, 2000/14/EC, 2002/95/EC, 2002/96/EC

Målt lydtrykniveau; Lwa = 93.3 dB(A)

Garanteret lydtrykniveau; Lwa = 93 dB(A)

2000/14/EC: Det garanterede lydtrykniveau er lavere end 96 dB(A). Procedure for

overholdelsesvurdering ifølge Anneks VI.

Bemyndiget organ: TUV product service GmbH

Bemyndiget organs identifikationsnummer: 70.403.06.078.13

fran 01-08-2006

ZWOLLE NL

J.A. Bakker - van Ingen J. Lodewijk

CEO Ferm BV Quality Manager Ferm Global

Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor til

enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.

Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland

FIN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CRM1030 FCO-2050 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info