Bedienungsanleitung Ferm CRM1037 - Compressor 2hp - 1500W - 24L (Seite 6 von 40) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

538609

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

6 Ferm

reach high temperatures. Do not touch these

parts to avoid burns (fig. 12-13).

• Transport the compressor by lifting it or by

using the special grips or handles (fig. 5-6).

• Children and animals should be kept far away

from the area of operation of the machine.

• If you use the compressor to spray paint:

a) Do not work in enclosed spaces or near naked

flames.

b) Make sure that the environment in which you

will be working has dedicated ventilation.

c) Protect your nose and mouth with a dedicated

mask (fig. 21).

• Do not use the compressor when the electrical

cable or the plug is damaged, and instruct an

authorised Support Service to replace them

with an original part.

• When the compressor is placed on a surface

higher than the floor, it should be secured to

prevent it from falling down during operation.

• Do not put objects or your hands in the

protective covers to avoid physical damage

and damage to the compressor.

• Do not use the compressor as a blunt

instrument against persons, objects or

animals in order to prevent serious damage.

• If the compressor is no longer in use, always

take the plug out of the plug socket.

• Always make sure that compressed-air hoses

are used for compressed air and which are

characterised by a maximum pressure

adjusted to that of the compressor. Do not try

to repair the hose if it is damaged.

Electrical safety

Earthing regulations

This compressor has to be earthed while in use in

order to protect the operator against electrical

shocks. The compressor is provided with a two-

core cable plus an earth. The electrical connection

has to be made by a qualified technician. We

recommend never disassembling the compressor

and neither making any other connections into the

pressure regulator. Repairs should be carried out

by authorised Support Services or by other

qualified centres.

Never forget that the earthing core is the

green or the yellow/green wire. Never

connect this green wire to a terminal

under load.

Before replacing the plug of the feed, make sure

that the earth cable is connected. If in doubt,

please call in a qualified electrician and have the

earthing checked.

Electrical connection

Always check whether the input voltage of the

motor corresponds to the mains voltage indicated

on the specification plate. The compressors are

supplied with an electrical cable and a two-pole

plug + earth. It is important to connect the

compressor with an earthed plug socket. (fig. 9)

Never use the earth-wire instead of the

neutral (0-wire). The earthing should take

place in accordance with accident

prevention regulations.

3. USE

For homehold use only

NB: The information you will find in this manual

has been written to assist the operator in the use

and maintenance of the compressor. Some

illustrations in this manual show details which may

differ from those of your compressor.

Installation

After having taken the compressor out of its

packaging (fig. 1) and having checked that it is in

perfect condition, and having noted that no

damage occurred during transport, the following

acts should be performed. If not yet fitted, fit the

rubber feet and the wheels on the tank according

to the instructions represented in fig. 2. Place the

compressor on a flat surface or at a maximum

slope of 10° (fig.3), in a well ventilated area,

protected against atmospheric factors and not in

explosive surroundings. If the surface area is

sloping and smooth, make sure that the

compressor will not move when in operation. If the

surface area is a board or a shelf of a bookcase,

just make sure that they cannot fall down by

securing them properly. For proper ventilation and

effective cooling, it is important that the

compressor is positioned at least 100 cm from the

wall (fig. 4).

Make sure that the compressor is

transported in the right way, do not turn it

upside down and don’t lift it with hooks or

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CRM1037 - Compressor 2hp - 1500W - 24L Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info