Bedienungsanleitung Ferm CSM1043 (Seite 12 von 140) (Alle Sprachen)

762265

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Ceramic tiles and slate

• Use a suitable blade. It is necessary to use

dust extraction, because the dust which

is created can hinder the movement of the

protective cover.

• Place protective tape or PVC tape on the base

plate or on the object to be sawn. This makes

it easier to saw and protects the tiles against

becoming scratched.

Practice sawing wood before trying

something more complicated, such as

metal or some types of plastic. More

force is required to hold the object to be

sawn and you may sometimes have to

use clamps to keep the object in place.

Dust extraction

Fig. 1

The Precision Circular Saw is a powerful saw. A

lot of dust will be produced when sawing. Since

the blade is fully enclosed, it is necessary to

extract the dust.

A vacuum cleaner can be attached to the saw’s

dust extraction pipe (8) using the dust adapter

included with the machine.

• Make sure the vacuum cleaner is suitable for

use with an electrical machine. In general,

household water and dust vacuum cleaners

are suitable.

• It is recommended to use dust extraction when

a lot of sawing is to carried out, because less

breaks will then be required to clean the saw

and the surroundings.

• It is necessary to extract the dust when sawing

dangerous materials, such as hardwood, MDF

and ceramics.

• It is recommended to extract dust if you wish

to keep the work area clean.

• It is necessary to extract the dust if the

material to be sawn is damp.

5. MAINTENANCE

Make sure that the machine is not live

when carrying out maintenance work on

the motor.

This machine has been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.

Maintenance

Machines are designed to function without

problems for a long time with a minimum of

maintenance. Cleaning the saw regularly and

handling it properly will help extend its lifespan.

Cleaning

For safety reasons, the saw must be cleaned

regularly. A build-up of dust can affect the

operation of the saw.

• Remove the plug from the plug socket.

• Remove the protective cover and clean it

thoroughly using a soft brush, such as a paint

brush.

• Clean the housing regularly with a soft cloth,

preferably each time after use. Make sure that

the ventilation holes are free of dust and dirt.

Use a damp soft cloth to remove stubborn dirt.

Do not use any solvents such as petrol, alcohol

or ammonia, etc. These types of substances

damage the plastic parts.

Lubrication

The device does not need any additional

lubrication.

Defects

If a defect appears due to a part wearing out,

please contact the service center on the warranty

card. At the end of these instructions there is

an exhaustive overview of the parts that can be

ordered.

ENVIRONMENT

To prevent damage during transport, the appliance

is delivered in a solid packaging which consists

largely of reusable material. Therefore please

make use of options for recycling the packaging.

Damaged and/or disposed of electrical or

electronic devices must be dropped off at

recycling stations intended for that

purpose.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CSM1043 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info