Bedienungsanleitung Ferm CSM1051 (Seite 7 von 56) (Deutsch, Englisch, Holländisch, Französisch)

798918

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

The pruner saw must be held with the right

hand on the handgrip and the left hand on the

grip surface. Before using the pruner saw, the

user must read and understand all information

and instructions in the instruction manual. The

user must wear appropriate personal protective

equipment (PPE). Only branch may be sawed with

the pruner saw. Materials such as plastic, rock,

metal or wood containing foreign bodies (e.g.

nails or screws) must not be processed!

Function description

The cordless pruner saw is equipped with a chain

quick tensioning system. The circulating saw

chain is guided over a blade bar (guide rail). The

device is provided with various protective devices

to protect the user.

Refer to the following descriptions for the function

of control elements.

TECHNICAL SPECIFICATIONS

Model No. CSM1051

Rated input voltage 10.8V / 12V

Weight (without charger + batteries) Approx. 1.28 kg

Recommended charger USB 5V d.c. 1000mA

Chain pitch 6.35mm

Chain width 1.1mm

Teeth of the sprocket chain wheel 6

Length of the sprocket chain wheel 152 mm

Acoustic pressure level (LPA) 79dB(A); KPA= 3dB(A)

Sound power level (LWA) 87dB(A); KWA= 3dB(A)

Guaranteed noise LWA 91dB(A)

Vibration ah=2.8m/s2; K=1.5m/s2

Temperature Max. 50 °C

Charging process 4 - 40 °C

Operation -20 - 50 °C

Storage 0 - 45 °C

Noise and vibration values were determined

according to the standards and stipulations

mentioned in the declaration of conformity.

The stated vibration emission value was

measured in accordance with a standard testing

procedure and may be used to compare one

power tool to another.

The stated vibration emission value may also be

used for a preliminary exposure assessment.

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardized test given in

EN 62841; it may be used to compare one tool

with another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned.

• using the tool for different applications, or with

different or poorly maintained accessories,

may significantly increase the exposure level.

• the times when the tool is switched off or when

it is running but not actually doing the job,

may significantly reduce the exposure level.

Protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns.

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2-3.

1. Front hand protection

2. Handgrip area

3. Switch lock

4. On/Off switch

5. Handle

6. Rear hand protection

7. Battery charge level indicator

8. Screw for the chain quick tensioning system

9. Sprocket cover

10. Mounting knob

11. Blade bar (guide rail)

12. Saw chain

13. Blade encasing

14. Rechargeable battery

14a. Release button

15. USB cable

15a. USB port (Type C)

15b. USB port (Type A)

16. Mounting screw

17. Chain sprocket

18. Threaded bore

19. Chain tensioner pin

SAFETY FUNCTIONS

3 Switch-on block

The switch-on block must be released for

switching on the device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CSM1051 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info