764189
5
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
5
EN
d) During charging, batteries must be placed
in the well ventilated area!
Before using the tacker
Always wear eye protection when using the
tool.
Maintain the tool with care.
Check for misalignment or binding of moving
parts, breakage of parts, and any other
condition that may affect the tools operation. If
damaged, have the tool serviced before using.
Check if the slide cartridge has been fastened
properly.
Do not use the tool in a humid environment.
Do not use the tool on materials containing
asbestos.
Using the tool
Do not use the tool if the switch does not turn
it “ON” or “OFF”.
Replacing cables or plugs
Immediately throw away old cables or plugs
when they have been replaced by new ones. It is
dangerous to insert the plug of a loose cable in
the wall outlet.
Remove all staples from the magazine
after each use
3. USE
The machine must be charged before
first use.
Charging the machine (with the charger
adaptor)
Fig. B
The machine can be charged by the charger
adapter or by your USB mobile phone charger.
If needed, connect the USB cable to the
charger adaptor by pushing its USB plug in the
charger adaptor’s USB socket.
Plug the small cable plug into the machine’s
charging socket.
Plug the charger into an electrical outlet and
wait for a while. The LED indicator on the
machine will lighten up and show the charging
status.
Charging the machine (on a USB socket)
Fig. C
If needed, remove the USB cable from the
charger adaptor by pulling it out of the USB
socket.
Plug the small cable plug into the machine’s
charging socket.
Plug the cable USB plug into USB device (for
example on your mobile phone charger).
Make sure the USB device is powered or
switched on.
Check charging status by checking if the
charging indicator light on the machine is
burning.
Charging indication light
Fig.A
The machine has a charging indication light which
indicates the status of the charging process:
LED color Status
Red Battery charging in progress
Green Battery charging finished, battery fully charged
After the battery is fully charged remove the
charger plug from the outlet and remove the
cable from the machine.
Lithium-Ion cells can be stored for a long
period without losing much of their
charge. When the machine is not being
used over a longer period of time it is
best to store the battery in charged
condition.
Application
Fig. 2
For this tool, use one of the following types
staples:
U Type 530: 6-12 mm
Loading the tacker
Before opening the tool, make sure the
tool is switched off.
To load the tacker
Fig. 3 - 4
Replacing staples
Press the slide unlock (2) to unlock the slide.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ferm ETM1005 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info