Wall chaser FWS-150K
152
Wall chaser FWS-150K
GENERAL
Congratulations!
With the purchase of this high quality Ferm tool, you
have made an excellent choice. Ferm products are
rugged, safe and easy to use.
It is very important to exercise care when handling
and servicing this tool. Please read these instructions
thoroughly, and be sure to follow the directions given.
You will then enjoy many years of service from your
Ferm tool.
Package contents
• Electric wall chaser
• Handgrip
• Diamond cutting discs (2 x)
• Cam wrench
• Hex key
• Cold chisel
• Dust extraction adapter
• Set carbon brushes
• Instructions for use
• Guarantee card
Product information
Safety Instructions
In these instructions for use, the following symbols
are used:
Caution: risk of bodily harm, fatality or da-
mage to the machine, from failure to follow
the directions in these instructions for use.
Caution: electrical current.
The machine is double insulated compliant
with EN50144; therefore no earth connecti-
on is required.
Visual check before starting to work
Specifications
Voltage 230 V~
Frequency 50 Hz
Power rating 1450 W
Rotational speed (not loaded)
8500/min
Max.cutting depth 8-40 mm
Max.channel width 8-30 mm
Weight 4,5 kg
Cutting disc (2x) Ø150 x 22,2 x 2,0
Lpa (Sound pressure level) 94,9 dB(A)
Lwa (Sound power level) 107,9 dB(A)
Vibration level 0,9 m/s
2
1. On/off trigger switch
2. Attachment point for
handgrip
3. Connection for
mechanical dust
extraction
4. Guide wheel
5. Distance washers
6. Spindle nut
7. Cutting depth fixing
knob
8. Cutting direction
9. Shaft lock
MAITENANCE AND REPAIR
Overview spare parts
MAINTENCE,CARE AND
REPAIR
Switch off and unplug the machine before carrying
out any cleaning or maintenance work.
CLEANING
Do not use flammable liquids to clean the angle grinder,
FAULTS
Switch OFF immediately at the mains plug and
remove the plug when:
- The plug or cable is damaged.
- The switch on the machine is defective.
-You smell or see smoke caused by scorched insulation
in the machine.
GENERAL SAFETY INSTRUCTIONS
