Bedienungsanleitung Ferm GRM1026 (Seite 6 von 40) (Englisch, Französisch, Türkisch)

763929

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

• High pressure hoses, fittings and couplings

are important for the safety of the machine.

Use only hosed, fittings and couplings

recommended by the manufacturer.

• To ensure machine safety, use only original

spare parts from the manufacturer or approved

by the manufacturer.

• Water that has flown through backflow

preventers is considered to the non-potable.

• The machine shall be disconnected from its

power source by removing the plug from the

socket-outlet during cleaning or maintenance

and when replacing the machine to another

function.

• Observe a distance of at least 30cm when

using the jet to clean painted surfaces to avoid

damaging paintwork.

• Do not use the machine if a supply cord or

important parts of the machine are damaged,

e.g. safety devices, high pressure hoses,

trigger gun.

• If an extension cord is used, the plug and

socket must be of watertight construction.

• Inadequate extension cords can be dangerous.

If an extension cord is used, it shall be suitable

for outdoor use, and the connection has to be

kept dry and off the ground. It is recommended

that this is accomplished by means of a cord

reel which keeps the socket at least 60mm

above the ground.

• In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this

appliance must not be supplied through an

external switching device, such as a timer,

or connected to a circuit that is regularly

switched on and off by the utility.

• To ensure the machine safety, please only

use original spare parts (including nozzle)

from the manufacturer or approved by the

manufacturer. Do not use the machine before

you changed them if they are damaged.

• Be care of the danger of the kickback force on

the spray assembly when opening the trigger

gun and grasp the gun with hands firmly.

• To reduce the risk of injury, close supervision

is necessary when a machine is used near

children. High-pressure cleaner shall not be used

by children or untrained person.

• Know how to stop the machine and bleed

pressures quickly. Be thoroughly familiar with the

controls.

• Stay alert and watch what you are doing.

• Do not operate the machine when fatigued or

under the influence of alcohol or drugs.

• Keep operating area clear of all persons.

• Do not overreach or stand on unstable support.

Keep good footing and balance at all times.

• Follow the maintenance instructions specified in

the manual.

• This machine must be grounded. If it has

malfunction or breakdown, grounding provides

a path of least resistance for electric current to

reduce the risk of electric shock. The plug must

be plugged into an appropriate outlet that is

properly installed and grounded in accordance

with all local codes and ordinances. The rating

voltage (V/Hz) of the machine has to be in

compliance with the local power supplying

voltage.

• Check with a qualified electrician or service

personnel if you are in doubt as to whether the

outlet is properly grounded. Do not modify the

plug provided with the machine. If it will not

fit the outlet, have a proper outlet installed by

a qualified electrician. Do not use any type of

adapter with this machine.

• Use only 3-wire extension cords that have

3-prong grounding-type plugs and 3-pole

cord connectors that accept the plug from the

machine. Use only extension cords that are

intended for outdoor use and the socket must

be of watertight construction. These extension

cords are identified by a marking “Acceptable for

use with outdoor machines; store indoors while

not in use.” Use only extension cords having

an electrical rating not less than the rating of

the machine. Do not use damaged extension

cords. Examine extension cord before using and

replace if damaged. Inadequate extension cords

can be dangerous. Do not abuse extension cord

and do not yank on any cord to disconnect.

Keep cord away from heat and sharp edges.

Always disconnect the extension cord from the

receptacle before disconnecting the machine

from the extension cord.

• To reduce the risk of electrocution, don’t start

and run the machine in the rain or storm. Keep

all connections dry and off the ground. Do

not touch plug with wet hands. It is strictly

prohibited to let water leak into the machine.

• When the machine is running, please maintain

a constant water supply. Without water

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm GRM1026 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info