Bedienungsanleitung Ferm HAM1012 (Seite 4 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

763716

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

can suffer hindrance of it;

• Before connecting the plug to the mains

voltage you have to check if the switch is in

position “0”;

• Keep the mains lead always away from the

mouthpiece of the hot air gun;

• Keep children and animals away from the

appliance if you are using it.

Immediately switch off the appliance when:

• Plug and/or cable are defective or damaged;

• The switch is defective;

• You smell or see smoke caused by scorched

insulation from the hot air gun.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Class II machine – Double insulation –

You don’t need any earthed plug

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm2. When using a cable

reel always unwind the reel completely.

3. USING THE APPLIANCE

The Hot air gun can be used for:

• Plumbing work like tube connections, solder,

bowing tubes;

• Removing paint, varnish and lacquer without

firerisk;

• Quickly drying of appliances which have

become wet;

• Drying surfaces for quick repairing;

• Removing self-adhesive labels in a clean way

placing PVC labels;

• Blistering after sticking PVC materials can be

smoothed after heating;

• Easy removing of vinyl carpeting:

• Forming all synthetics with a low temperature

(450 degrees) among which polyethylene and

PVC;

• Forming all synthetics with a high temperature

(580 degrees) among which acryl and plexiglass;

• Smelting synthetics, among which matters and

foils with PVC layer;

• Applying heat shrinking tubes;

• Shrinkwrappers;

• Thawing tubes and engines;

• Repairing finishing layers: email of bath and

household appliances;

• Applying epoxypowder coverlayers;

• Repairing of ski’s, surf-boards and other

sports goods;

• Unscrewing too fast fixed screws and

connections.

Operation

Fig. A

You can work manually with this hot air gun or you

can put it in a vertical position.

• Check if the mains switch is on position “0”

before you connect the apparatus;

• Keep the main lead always away from the hot

air stream and the mouth piece;

• Put the mains switch in position ‘I or II’ to let

your hot air gun operate:

“I” = 450 degrees, air flow 300 l/min.

“0” = Off

“II” = 600 degrees, air flow 500 l/min.

When the temperature is excess 600° C, the heats

switches it off automatically, however, the heater

continues to run. When the heater has cooled to

operating temperature, the heater is switched on

again.

Switching off:

Slide the switch to 0.

Tip: If you want to get the best result, test all

appliances on a little part of the workpiece.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm HAM1012 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info