Bedienungsanleitung Ferm HTM1008 (Seite 12 von 44) (Deutsch, Englisch, Holländisch, Französisch)

800223

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

You may not use the hedge trimmer

without the protection guard.

Always use both hands to hold the

hedge trimmer and keep it away from

your own body.

Before use (Fig. G)

Remove the blade guard (11) and lubricate the

blades (4).

Switching on and off

Always hold the hedge trimmer with both hands.

Place one hand on the telescopic handle (7)

and one hand on the rear handle near the power

switch. Press and hold the power switch (6) to

operate the machine. When the power switch is

released the machine will automatically stop.

After use

Wipe off any dirt and debris from the blades (4)

using a brush or cloth. Lubricate the blades, place

the blade guard (11), and remove the battery (12)

before storing the machine.

5. MAINTENANCE

Before cleaning and maintenance,

always switch off the machine and

remove the battery pack from the

machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that

the ventilation openings are free of dust and

dirt. Remove very persistent dirt using a soft

cloth moistened with soapsuds. Do not use any

solvents such as gasoline, alcohol, ammonia,

etc. Chemicals such as these will damage the

synthetic components.

Cutting blade

• Always wear gloves when handling or cleaning

the cutting blade.

• Clean the cutting blade and spray with a

protective oil after every use. We recommend

lubricating the cutting blade with protective oil

at regular intervals during long working periods.

• Visually inspect the condition of the cutting

blade Check that the screws are firmly seated

in the cutter bar.

• Ensure that the blade guard is fitted on the

machine.

Storage

The hedge trimmer should be kept in a safe, dry

place, well out of the reach of children. Do not

place other objects on top of it.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be

collected at the appropriate recycling

locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC for

Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately and

disposed of in an environmentally friendly way.

WARRANTY

FERM products are developed to the highest

quality standards and are guaranteed free of

defects in both materials and workmanship for the

period lawfully stipulated starting from the date

of original purchase. Should the product develop

any failure during this period due to defective

material and/or workmanship then contact your

FERM dealer directly.

The following circumstances are excluded from

this guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers.

• Normal wear and tear.

• The tool has been abused, misused or

improperly maintained.

• Non-original spare parts have been used

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm HTM1008 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info