Bedienungsanleitung Ferm JSM1023 (Seite 6 von 140) (Alle Sprachen)

697791

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Kickback

Kickback is the upward and backward

movement of the saw blade when the saw blade

unexpectedly touches an object. Securely hold

the machine during use. Keep your attention

focused on the operation.

Kickback is usually caused by:

- unintentionally touching hard objects or

materials with the rotating saw blade;

- a blunt saw blade;

- a saw blade that is not properly mounted;

- sawing into a previous cut;

- a lack of attention to the operation;

- an instable stance.

Electrical safety

Always check that the voltage of the

power supply corresponds to the voltage

on the rating plate.

• Do not use the machine if the mains cable or

the mains plug is damaged.

• Only use extension cables that are suitable

for the power rating of the machine with a

minimum thickness of 1.5 mm2. If you use an

extension cable reel, always fully unroll the

cable.

Mains plug replacement (UK only)

If the moulded 3-pin plug attached to the unit is

damaged and needs replacing, it is important

that it is correctly destroyed and replaced by an

approved BS 1363/5A fused plug and that the

following wiring instructions are followed.

The wires in the mains cable are coloured in

accordance with the following code:

blue neutral

brown live

As the colours of the wires in the mains cable

of the unit may not correspond to the coloured

markings identifying the terminals in the plug,

proceed as follows:

- The wire which is coloured blue must be

connected to the terminal which is marked

with the letter N or coloured black.

- The wire which is coloured brown must be

connected to the terminal which is marked

with the letter L or coloured red.

Technical data

Mains voltage 230 V~

Mains frequency 50 Hz

Power input 570 W

No-load speed 500 - 3,000/min

Max. sawing depth (wood) 70 mm

Max. sawing stroke 18 mm

Mitre angle 45°

Number of pendulum positions 4

Weight 2.0 kg

Noise and vibration

Sound pressure (Lpa) 90.4 dB(A) K=3dB

Acoustic power (Lwa) 101.4 dB(A) K=3dB

Vibration (wood) 7.7 m/s

K=1.5 m/s

Vibration (metal) 13.0 m/s

K=1.5 m/s

Wear hearing protection.

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardised test given in

EN 60745; it may be used to compare one tool

with another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

significantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

DESCRIPTION (FIG. A)

Your pendulum action jigsaw has been designed

for sawing wood, metal, plastics, ceramics,

rubber, etc. to any required size and in any

required shape.

1. On/off switch

2. Lock-on button

3. Speed adjustment wheel

4. Pendulum action switch

5. Guard

6. Saw blade holder

7. Saw shoe

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm JSM1023 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info