Bedienungsanleitung Ferm JSM1026 (Seite 5 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

697753

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

NOISE AND VIBRATION

Sound pressure (Lpa) 70 dB(A) K=3 dB(A)

Acoustic power (Lwa) 81 dB(A) K=3 dB(A)

Vibration (wood) 3.33 m/s

K=1.5 m/s

Vibration (metal) 3.98 m/s

K=1.5 m/s

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardised test given in

EN 62841; it may be used to compare one tool

with another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

signifi cantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

DESCRIPTION (FIG. A)

Your jigsaw has been designed for sawing wood,

metal, plastics, ceramics, rubber, etc. to any

required size and in any required shape.

1. On/off switch

2. Lock off button

3. Saw blade holder

4. Saw shoe

ASSEMBLY

Before assembly, always switch off the

machine

The battery must be charged before firstuse.

Removing the battery from the machine

• Push the battery unlock buttons and pull the

battery out of the machine

Inserting the battery into the machine

Ensure that the exterior of the battery is clean and

dry before connecting to the charger or machine.

• Insert the battery (2) into the base of the

machine

• Push the battery further forward until it clicks

into place.

Charging the battery (with the charger)

• Plug the charger plug into an electrical outlet

and wait for a while. The LED indicator will

lighten up and show the charging status.

LED Charger status

Red Battery charging in progress

Green Battery charging finished, battery fully charged

• Fully charging the 1.5Ah battery may take up

to 240 minutes.

• After the battery is fully charged remove the

charger plug from the outlet and remove the

battery from the charger.

When the machine is not being used

over a longer period of time it is best to

store

Mounting and removing the saw blade

Refer to the table below to select the required saw

blade.

Saw blade Material

Coarse Wood

Medium Wood

Fine Steel, aluminium, plastic

Very fine Wood (curves)

Do not attempt to remove the guard from

the machine.

Fitting a saw blade

Fig. B

The machine is equipped with a quick fit system.

• Turn the clamping ring (5) of the saw blade

holder as far to the left as possible and hold it

there.

• Place the saw blade in the blade holder.

• Let go of the clamping ring.

• Make sure when changing the saw blade that

the blade holder is free of material debris (such

as splinters of wood or metal).

• Before use, always check that the saw blade is

securely fixed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm JSM1026 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info