632708
3
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
62 Ferm
HEDGE TRIMMER
SAFETY AND OPERATING
INSTRUCTIONS
For your own safety and for the safety of others, ple-
ase read these instructions carefully before using
this appliance. Keep in a safe place for future reference.
Warning!
Always read the instruction for electrical products care-
fully before use.
It will help you understand your product more easily and
avoid unnecessary risks.
Keep this instruction manual in a safe place for
future use.
TECHNICAL SPECIFICATION
EXPLANATION OF SYMBOLS
In accordance with essential applicable safety stan-
dards of European directives.
Class II machine - Double insulation - You don’t
need any earthed plug.
Risk of damaging material and/or physical injuries.
Read the instructions.
Wear eye protection
Do not use in rain.
Remove plug from the mains
Keep bystanders away.
CONTENTS OF PACKING
1 Main Body
1 Guard
2 Screws
1 Instruction manual
1 Warranty card
FEATURES
1. Power cord
2. On/Off switch
3. Safety guard
4. Upper body
5. Lower body
6. Cable hook
7. Safety lock
8. Extension
Thread cutter (see fig. 3)
DOUBLE INSULATED
This power tool is double insulated. All the
external parts are insulated from the mains
power supply. This makes it unnecessary for
this power tool to be earthed.
SAFETY INSTRUCTIONS
Dispose of plastic bags safely - they are a suffocation
hazard for young children.
Keep the area you are working in clean and tidy.
Do not use power tools in the rain or wet environ-
ments.
Do not use power tools where there is a risk of fire or
explosion - i.e. near flammable liquids or gases.
Do not allow children into the area where you are
working.
Do not let children or other people touch power
tools.
Do not leave the power tool unattended.
Store in a dry place well out of reach of children.
Model | FGT-220
Voltage | AC 230 V - 50Hz
Input power | 220 Watt
Overall length | 980 mm
Cutting circle | 240 mm
No load speed | 11.000/min
Weight | 1.68 kg
Trimmer thread | Ø 1.2mm
Lpa | 81dB(A)
Lwa | 96dB(A)
Vibration | 2.1m/s
2
Ferm 3
PARTS LIST FGT-220
REF. NR. DESCRIPTION PC
9 SWITCH 501330
11 SWITCH TRIGGER 501331
11 CONNECTION SOCKET 501332
14 CONNECTION PLUG AND CORD 501333
21 NYLON WIRE 501334
22 SPOOL 501351
23 SPOOL COVER 501352
25 EXTENSION 501353
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ferm LTM1003 - FGT 220 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info