Bedienungsanleitung Ferm MSA1030 (Seite 6 von 24) (Deutsch, Englisch, Holländisch, Französisch)

800235

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

2. PRODUCT INFORMATION

Intended use

This product is designed and intended for

domestic use, for general purpose tool stand use

in home and garden environments and for hobby

purposes. This workbench is not developed

for professional use. The Workbench must be

handled, cared for and maintained in accordance

with these instructions. Any other use is deemed

improper and may result in damage to property or

personal injury.

The universal tool stand is designed for use

with tabletop devices such as mitre saws, scroll

saws, etc. Electric power tools without suitable

mounting holes are not permitted to be fitted to

the universal tool stand and shall not be operated

in conjunction with the universal tool stand.

Electric power tools must be firmly bolted to the

universal tool stand before starting them up.

The universal tool stand is also designed as a

workpiece support when working with mitre

saws, scroll saws, and other similar electric

power tools. The maximum workpiece length is

3m. Additional workpiece supports may have to

be used (e.g. a roller trestle) in order to prevent

longer workpieces tilting. Attention: Ensure that

the workpiece support is secure and not tilted!

Technical specifications

Model No. MSA1030

Max. permissible load 150kg

Opened dimensions L: 935-1945mm

W: 640mm

H: 825-935mm

Closed dimensions L: 984mm

W: 415mm

H: 224mm

Weight 9.9 kg

DESCRIPTION

The numbers in the following text refer to the pic-

tures on pages 2-4.

1. Roller

2. Workpiece support

3. Workpiece support knob

4. Extension arm

5. End stop

6. Extension arm knob

7. Mitre saw mounting bar

8. Carrying handle

9. Frame

10. Pin slot

11. Spring-loaded pin

12. Leg

13. Foot

14. Mounting bar lever

15. Mitre saw mounting hardware (bolts, washers,

spring washers, nuts)

3. ASSEMBLY

Study each figure and identify the

components required with reference to

the contents table above.

Unfolding The Stand (fig. A)

1. Lay the mitre saw stand on the floor with the

folded legs (12) facing upwards.

2. Depress the spring-loaded pin (11) and unfold

the two upper legs (12) until the spring-loaded

pin (11) clicks into the pin slot (10).

3. Repeat the same procedure for the other two

legs.

4. Lift the stand and flip it into the upright

position.

5. Check that the stand is stable and all of the

leg locking pins have engaged properly.

Folding The Stand

One pair of legs on the stand must fold firstly for

the stand to fold flat. The legs have not folded

into place if the spring-loaded pins (11) do not

pop into place. The legs should not swing about

when the stand is picked up if the legs have

locked into position.

1. Turn the mitre saw stand upside down on the

floor with the legs (12) sticking up.

2. Depress the spring-loaded pin (11) on the

lower pair of legs and fold them in.

3. Repeat the same procedure on the other pair

of legs.

Attaching The Extension Arms (Fig. B)

1. Slide the extension arm (4) into the frame (9)

until the desired length is reached.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm MSA1030 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info