Bedienungsanleitung Ferm MSM1021 - FKZ-255S (Seite 6 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

634077

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

• Keep the saw blade and the clamping surface

for the clamps clean.

• The saw blade ange must always be

mounted with the notch tightened towards the

saw blade.

• Check that all tensioning devices and locks

are secure and that no part has too much play

in it.

• Never just use your hands for sawing.

• Always press the piece of work rmly against

the stop, so that it cannot tilt or turn while

sawing. No impurities must gather underneath

the piece of work being sawn.

• Make sure that the piece of work cannot move

after being sawn, for example because it is not

completely supported by the surface of the

machine.

• For sawing pieces of work that are not

supported by the full surface, use some

padding or another machine.

• Replace any worn-out table inserts.

• Only use saw blades recommended by the

manufacturer (EN-847-1).

• Never use HS (High Speed) saw blades.

• Check that the sawn off bits can be removed

sideways from the saw blade, otherwise they

can get caught on the blade and ung about.

• Never saw more than one piece of work at the

same time.

• Be extremely careful when sawing large, very

small or awkward pieces of work.

• Be careful when sawing double mitre joints.

• Use additional supports (tables, sheer-legs

and the like) for long pieces of work that can

tip over and topple off the machine if they are

not properly secured.

• Never use the machine to saw pieces of work

that are so small that they cannot be secured

safely.

• When sawing prole sections the work must

be carried out such that the piece of work

cannot slide away and the saw blade cannot

become jammed. A proled piece of work must

lie at or be held in place by an attachment so

that toppling or sliding during the work is

prevented.

• Round pieces of work such as tubes must be

well secured, otherwise these can revolve and

the danger exists that the saw blade catches

in them. Always keep the piece of work on the

table and against the stop using a suitable

accessory or attachment.

• Make sure that the piece of work does not

have any nails or other foreign objects in it.

User safety

• Make sure you have a clean and tidy working

environment.

• Make sure the working environment is well lit.

• The user of the machine must be instructed in

the use, adjustment and operation of the

machine.

• Use a dust mask or dust hood to prevent the

inhalation of (harmful) dust.

• Wear gloves when you exchange the saw

blade or when rough material is to be sawn. It

is best to keep saw blades in a separate

holder to prevent anyone getting hurt.

• When the machine is equipped with a laser,

this may not be replaced by a different type of

laser. Repairs may only be carried out by the

laser manufacturer or a recognised specialist.

• The operator should wear ear protectors to

reduce any damage to hearing.

• To prevent accidents occurring by the

accidental switching on of the machine, the

plug must always be pulled out of the socket

before adjustment of the stop or the saw head

is carried out, when changing blades or

accessories, and when maintaining the

machine.

• To prevent electric shocks, when plugging the

plug into the socket the metal pins must not be

touched in any way whatsoever.

• Never use the cord to pull the plug out of the

socket. Keep the cord away from oil, heat and

sharp objects.

• Never apply a cleaning or lubrication agent to

a saw blade that is still revolving.

• To prevent res, never use the machine in the

vicinity of ammable liquids, vapours or gases.

• Always use original accessories: others may

cause wounding.

• Always choose the right saw blade in relation

to the material to be sawn.

• Ensure that during operation, the swinging

guard functions properly. It must move freely

and be able to close by itself. It should never

be jammed in the open position.

• Do not work with material containing asbestos.

• Protect the saw blade from strikes and shocks.

Do not apply side pressure to the saw blade.

Transport

Before all work on the machine, pull the

mains plug.

Check that all locks and tensioning devices are

secure:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm MSM1021 - FKZ-255S Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info