Bedienungsanleitung Ferm MSM1038 (Seite 6 von 132) (Alle Sprachen)

697796

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

are safer and easier to control. Grease oil

handles are slippery causing loss of control

d) Make sure you always have a clean and tidy

working environment. You could slip or trip

e) Stay alert, watch what you are doing and use

common sense when operating a power tool

f) Do not overreach. Keep proper footing and

balanced at all the time. This enables better

control of the power tool in unexpected

situations

g) Do not work with a machine while you under

the influence of alcohol, drugs or medication.

Inattention while operating power tools may

result in very dangerous injury

h) Use always protective equipment. Always wear

eye protection, dust mask, hearing protectors

and safety shoes. By service on machine or

raw materials use gloves. Keep your hair back.

Reduce changes on personal injury

i) Be careful when sawing double miter joints.

Saw blade, Work piece and your hands must

be always visible during sawing

j) Never saw more than one piece of work at the

same time

k) Make sure that the piece of work not have any

nails/ staples or other foreign objects in it

l) Never process metal or stone with this machine

m) Do not work with material containing asbestos

3. Power tool safety

The first time that the machine is used and then

every subsequent time that it is used:

Before carrying out any work on the

machine, disconnect the mains plug from

the power supply.

General: Check the entire saw machine. If any

part of the machine is missing, bent, damaged

or is dysfunctional in any other way, or if any

mechanical and/or electrical faults occur or are

visible, or if the machine makes any extremely

loud noises, refer to the user manual.

If any defects are detected on the machine, they

must all be rectified before the machine is used.

Only original parts should be used!

If you have any outstanding concerns which

could affect your own safety or the safety of the

machine, please consult the machine supplier.

Electrical

a) Always use an Original power plug which

matches the outlet, do not use an adapter

plug with earthed (grounded) power tools.

Unmodified plugs and matching outlets will

reduce risk of electrical shock

b) Do not use the machine with a damaged

power cable. Do not touch the damaged

cable and pull the mains plug when the cable

is damaged while working. Damaged cables

increase the risk of an electrical shock

c) Check the cable regularly and have a damaged

cable repaired. Replacing cables or plugs.

Immediately throw away old cables or plugs

when they have been replaced by new ones. It

is dangerous to insert the plug of a loose cable

in the wall outlet. Use original power cord and

plugs, repairing only through an authorized

person, this will ensure that the safety of the

power tool is maintained!

d) To prevent electrical shocks. When plugging

the plug into the socket the metal pins must

not be touched in any way whatsoever

e) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electrical shock

f) Never use the cord to pull the plug out of the

socket. Keep the cord and plug away from oil,

heat and sharp objects

g) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use a cord for outdoor use reduces the risk of

electric shock

h) When machine is equipped with laser. Do not

direct the laser beam at persons or animals

and do not stare into the laser beam yourself.

Not even in distance. Laser must be according

to EN 60825-1 Class 2.

i) Repairs of a laser may only be carried out by

the laser manufacture or a specialist

j) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD

reduces the risk of electric shock

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm MSM1038 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info