Bedienungsanleitung Ferm MSM1039 (Seite 5 von 108) (Alle Sprachen)

697795

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

2. SAFETY INSTRUCTIONS

By using electric tools basic safety precautions

should always be followed to reduce the risk of

fire. Electrical shock and personal injury.

Always read the specific product instruction

manual and the safety instructions before

attempting to operate the power tool and store

these instructions.

Install of a stationary machine.

Fig. 6

This machine is a stationary machine and for

safety reasons must always be firmly installed and

not used for mobile applications.

You can install the machine in two ways:

a) As a stationary machine on a workbench.

In case the machine must be secured to the

workbench with 4 bolts

b) As a stationary machine on a sub frame. In this

case the machine must be secured to the sub

frame with 4 bolts and the sub frame anchored

with 4 bolts to the floor plate with dimensions

of at least 1 square meter

Symbols

The following symbols are important for the

operations of your power tool. The correct

interpretations of the symbols helps you operate

the power tool more save

Denotes risk of personal injury, loss of life

or damage to the tool in case of

nonobservance of the instruction in this

manual

Caution, risk of electric shock

Keep bystanders away

Wear eye protection

Wear ear protectors. Exposure to noise

can cause hearing loss.

Wear a dust mask

Danger Area! Keep hands far away

(10cm) from the cutting area while the

machine is running. Danger of injury when

coming in conatct with the saw blade

Do not direct the laser beam at persons

or animals and do not stare into the laser

beam yourself, not even from a distance.

This power tool produced laser class 2

laser radiation according to EN 60825-1.

This lead can lead to person being

blinded

Disc dimensions. Observe the

dimensions of the saw blade. The hole

diameter must match the tool spindle

without play. *Use only a fill ring which is

specified by supplier, filling ring may not

have any play

Tranport the machine only when the

machine is in inward transport position

1. Work area safety

a) Keep work area clean and well lit. Cluttered or

dark areas invite accidents

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes

c) Keep children and bystanders far away while

operation a power tool. Distractions can cause

you to lose control, or material can shut away

d) Never leave the machine unattended without

first disconnecting it from the mains voltage.

2. Personal safety

a) If you are not familiar with using such machine.

You would be better to be informed first by a

professional, an instructor or by a technician

b) Store idle power tools out of the reach of

children. Power tools are dangerous in the

hands of untrained users

c) Keep power tools dry, clean and free from oil

and grease. Properly maintained power tools

are safer and easier to control. Grease oil

handles are slippery causing loss of control

d) Make sure you always have a clean and tidy

working environment. You could slip or trip

e) Stay alert, watch what you are doing and use

common sense when operating a power tool

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm MSM1039 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info