Bedienungsanleitung Ferm PSM1025 (Seite 7 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

763838

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Removing

● Open the sanding paper clamps (4).

● Remove the sanding paper (7) from the

sanding pad (3).

● Close the sanding paper clamps (4).

USE



● To switch on the machine, press the on/off

switch (1).

● To switch the machine to continuous mode,

keep the on/off switch (1) pressed and

simultaneously press the lock-on button (2).

● To switch off continuous mode, press the on/off

switch (1) again.

● To switch off the machine, release the on/off

switch (1).



● Insert the dust extraction adapter (9) into the

dust extraction connection (7).

● Connect the hose of a vacuum cleaner to the

dust extraction adapter (9).

Hints for optimum use

● Clamp the workpiece.

● Firmly hold the machine with both hands.

● Switch on the machine.

● Place the sanding pad with sanding paper on

the workpiece.

● Slowly move the machine over the workpiece,

rmly pressing the sanding pad against the

workpiece.

● Do not apply too much pressure on the machine.

Let the machine do the work.

● Switch off the machine and wait for the machine

to come to a complete standstill before putting

the machine down.

CLEANING AND MAINTENANCE

4 Before cleaning and maintenance,

always switch off the machine and

remove the mains plug from the mains.

● Regularly clean the housing with a soft cloth.

● Keep the ventilation slots free from dust and

dirt. If necessary, use a soft, moist cloth to

remove dust and dirt from the ventilation slots.

● Regularly clean the sanding pad to avoid

inaccuracies during use.



● To remove the old sanding paper (8),

proceed as described in the section

„Mounting and removing the sanding paper“.

● To mount the new sanding paper (8),

proceed as described in the section

„Mounting and removing the sanding paper“.



In case of wear, the sanding pad must be replaced.

● If necessary, remove the sanding paper.

● Loosen the screws (10) from the sanding pad

(3).

● Remove the old sanding pad (3).

● Mount the new sanding pad (3).

● Tighten the screws (10) to the sanding pad (3).

WARRANTY

Consult the enclosed warranty terms.

ENVIRONMENT

Disposal

The product, the accessories, and the packaging

must be sorted for environmentally friendly

recycling.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2002/96/EC

for Waste Electrical and Electronic Equipment

and its implementation into national right, power

tools that are no longer usable must be collected

separately and disposed of in an environmentally

friendly way.

The product and the user manual are subject to

change. Specifications can be changed without

further notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm PSM1025 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info