42 Ferm
DETAIL SANDER FDS-220
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
SAFETY AND OPERATING INSTRUCTIONS
For your own safety and for the safety of others,
please read these instructions carefully before
using this appliance. It will help you understand your product
more easily and avoid unnecessary risks.
Keep this instruction manual in a safe place for future use.
TABLE OF CONTENTS:
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
CONTENTS OF PACKING
1 Detail sander
5 Sandpaper
1 Dust bag
1 User manual
1 Warranty card
1 Safety instructions
INTRODUCTION
The Detail sander FDS-220 is designed for dry sanding of
surfaces of wood, plastic and filler as well as for painter
surfaces. It is particularly suitable for working on
profiles, in corners or hard-to-reach areas.
TECHNICAL SPECIFICATION
FEATURES
Fig. 1
1. On/off switch
2. Handle
3. Dust bag
4. Ventilating apertures
5. Sandpaper
6. Sanding-sole
2. SAFETY INSTRUCTIONS
EXPLANATION OF SYMBOLS
In this manual and/or on the machine the following
symbols are used:
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Risk of damaging material and/or physical injuries
Shows presence of voltage
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
ELECTRICAL SAFETY
• Always check that the power supply corresponds to
the voltage on the rating plate.
• Immediately throw away old cables or plugs when
they have been replaced by new ones. It is dangerous
to insert the plug of a loose cable in the wall outlet.
• Only use an approved extension cable suitable for
the power input of the machine. The minimum
conductor size is 1,5 mm2. When using a cable reel
always unwind the reel completely.
SPECIFIC SAFETY INSTRUCTIONS
• Contact or inhalation of dust coming free during
sanding (e.g. lead painted surfaces, woods and
metals), can endanger the health of operator and
bystanders. Always wear appropriate personal
equipment as a dust mask and use the dust bag during
sanding.
• Check that the switch is not in the “ON” position
before connecting the machine to the mains voltage.
• Always keep away the mains lead from moving parts
of the machine.
• Use safety glasses, especially when sanding above
your head.
3. ASSEMBLY
DUST COLLECTION
Fig. 2
The sander has been carried out with a dust bag (3) to
keep the working surface clean. The dust bag must be
installed on the back side of the machine, on the opening.
It is necessary to empty the dust bag regularly for an
efficient use.
Empty it as follows:
• Turn the dust bag slightly and pull it out of the
machine’s adapter.
• Empty the dust bag in a suitable place.
• Push the dust bag on to the machine’s adapter till it
locks into place.
Remember that the dust extraction only works
when using perforated sandpaper.
Voltage | 230 V~
Frequency | 50 Hz
Input power | 220 W
Tool class | II
No load speed | 13000/min
Weight | 1.25 kg
Lpa (Sound pressure level) | 76.0 dB(A)
Lwa (Sound power level) | 87.0 dB(A)
Vibration | 1.24 m/s2
Ferm 3
SPARE PARTS LIST FDS-220
REF NR DESCRIPTION FERM NR
408225 CARBON BRUSH (SET) 3
408228 LONG SUPPORT BAR 12
408226 SAND SOLE 15
408255 SHORT SUPPORT BAR 20
408227 SWITCH + COVER 21+22
408257 DUST BAG 30
