Bedienungsanleitung Ferm RSM1019 (Seite 4 von 120) (Alle Sprachen)

697797

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Indicates electrical shock hazard.

Wear a dust mask. Working with wood,

metals and other materials may produce

dust that is harmful to health. Do not

work with material containing asbestos!

The number of revolution of the machine

can be electronically set.

Double insulation.

Safety instructions

The machine must not be damp and must not be

operated in a wet environment. Wear protective

gloves and sturdy footwear.

Hold power tool by insulated gripping

surfaces, when performing an operation where

the cutting accessory may contact hidden

wiring or its own cord.

Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

Do not saw materials containing

asbestos!

• Wear protective goggles when working with

materials which produce large amounts of

chips.

• Wear a protective mask when sawing other

fibrous materials.

• Remove adjusting keys and wrenches before

turning the tool on.

• Secure your workpiece with clamps.

• Move machine towards the workpiece only

when switched on.

• Always hold machine with both hands and

ensure that you have a safe footing while

working.

• The machine may be operated only with the

foot plate mounted. When sawing, the foot

plate must always rest on the workpiece.

• Incorrect handling may damage the machine.

Therefore always comply with the following

instructions.

• Use only sharp saw blades in perfect

condition; replace cracked, distorted or blunt

saw blades immediately.

• Machine should only be switched on with

blade installed

• Do not attempt to stop the saw blade with

lateral pressure after switching off.

• Only use genuine accessories.

3. MOUNTING ACCESSORIES

Fitting a saw blade

Fig. B

The machine is equipped with a quick fit system.

• Turn the clamping ring (2) of the saw blade

holder as far to the left as possible and hold it

there.

• Place the saw blade in the blade holder.

• Let go of the clamping ring.

• Make sure when changing the saw blade that

the blade holder is free of material debris (such

as splinters of wood or metal).

• Before use, always check that the saw blade is

securely fixed.

Removing the saw blade

• Turn the clamping ring of the saw blade holder

as far to the left as possible and hold it there.

• Remove the saw blade from its holder.

• Let go of the clamping ring.

Adjustment of the guide shoe

Fig. A

When the blade loses its sharpness at some

sections of it’s cutting edge, reposition the

foot plate to use a sharp, unused portion of its

cutting edge. Besides this, the foot plate can

also be used for adjusting maximum saw depth,

especially useful when sawing in hollow walls.

• The footplate can be extended by loosening

the two footplate mounting screws (5) using

the 4 mm hexagon key and then pulling the

footplate out to the required length.

Ensure the footplate adjustment screws are

secure before resuming work.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm RSM1019 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info