Bedienungsanleitung Ferm SGM1008 (Seite 7 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

510105

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

4. MAINTENANCE

Make sure that the machine is not live

when carrying out maintenance work on

the motor.

This machine has been designed to operate over

a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.

Troubleshooting

 



 

• Replace swirl head.

 

• Re-adjust pick up pipe.

 

• Clean with thinner.

 

• Clean nozzle.

 

• Clean with thinner.

 

• Adjust.

2. Atomization is not good

 

• Adjust.

 

• Check viscosity of the paint.

3. Over painting

 

resulting in piston being stuck in cylinder.

• Disassemble spray gun and clean with

thinner.

 

• Adjust the volume clockwise to reduce

spraying. Two thin coats are better then one

thick coat.

 

• Check viscosity.

4. Motor louder than normal

 

resulting in piston being stuck in cylinder.

• Disassemble spray gun and clean with

thinner.

 

 

• Check power supply.

 

 

• Re-adjust.

 

air being sucked in.

• Rell with paint.

 

pipe completely.

• Check pick up pipe and viscosity level.

7. “Orange Skin” excessive fogging

 

• Use correct solvent.

 

• Hold spray gun closer to the object.

 

• Thin the paint.

Cleaning and maintenance

Fig. G

Always remember to disconnect from

the mains supply before cleaning the

spray gun or paint container.



thoroughly after every use. Failure to clean it will

almost certainly result in blockages and it may not

operate when you next come to use it! The

guarantee does not cover cleaning a sprayer that

has not been properly cleaned by the user. The

following action must be taken after every use:

 

container.

 

thatwas used.

 

spray through the spray gun until only clean

thinner is coming out of the nozzle.

 



 

other debris or paint that remains.

 

few drops of light oil to the two apertures (F).

This will lubricate the piston and cylinder.





so the following action should be taken:

 

Ferm SGM1008 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info