634093
2
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
Ferm 59
EXPLODED VIEW
Saw bench
The following pictograms are used in these instructions
for use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
SAFETY INSTRUCTIONS
When using electric machines always observe the
safety regulations applicable in your country to redu-
ce the risk of fire, electric shock and personal injury.
Read the following safety instructions and also the
enclosed safety instructions.
ADDITIONAL SAFETY INSTRUCTIONS
1When using the saw blades with hard metal teeth
(Carbon tipped) it is advisable to use blades with a
negative or slightly positive cutting angle. Do not use
any saw blades with deeply cut teeth. They can grip
the Top guard.
2 Attention: First carefully assemble all the parts befo-
re starting work. Follow the procedure as indicated.
3 If you are not familiar with using such a machine, you
would be better to be informed first by a professional,
an instructor or by a technician.
4 Always clamp or press the workpiece firmly against
the saw guide, before you carry out the process. The
use of all possible clamping set-ups is preferable to
using your hands.
5 Important: If you are holding the workpiece by hand for
the process to be carried out, keep a minimum distan-
ce of 100 mm from the saw blade.
6 Always press the workpiece against the bench.
7Keep the saw blade sharp and check regularly
whether it rotates freely without abnormal vibrations.
Replace the saw blade if necessary.
8 Allow the machine to rotate freely until it reaches the
maximum number of revolutions, before you start the
process.
9 Maintain the air inlets at the back and the bottom of the
bench saw machine and electric motor for a longer
machine life. Dust piles must be removed.
10 Always lock the different degree set-ups before you
start processing.
11 Only use the correct saw blade. Too small or too big
saw blades are extremely dangerous.
12 Grease the new saw blade and clean the flanges befo-
re you assemble the new blade. Then assemble the
blade in the correct direction and pull the flanges firm-
ly using the central bolt (left thread!)
13 Only use original flanges. All other types are not suita-
ble.
14 Never work without the top guard of the saw blade.
15 The moving part of the top guard must also remain
assembled.
16 Never grease the saw blade while it is rotating.
17 Always keep your hands removed from the track of the
saw blades.
18 Never pick up the workpiece by grasping with your
hands along or behind the saw blade.
19 Ensure that the workpiece never touches the saw bla-
de before the machine has been switched on.
20 Never process metal or stone sorts with this machine.
21 Use support aids in order to support long workpieces.
22 Never use the machine in a dangerous environment,
where inflammable gases or fluids are present.
23 Never leave the machine unattended without first dis-
connecting it from the mains voltage.
24 If you hear abnormal noises, try to trace them or take
the machine to a recognized fitter, or repair company.
25 If a part is broken or damaged, replace it or repair it
immediately.
26 Never stand in the track of the saw blade but stand to
the left or the right of the saw bench.
27 Your hands must likewise be placed next to the track
of the saw blade.
28 Always use a push stick instead of your hands to push
the wood through the saw.
29 Always place the wood at the front of the saw bench
and then push it further back.
30 For mitring only the adjustable guide must be used
and the fence must be removed.
31 Never use the fence as a linear measure for cutting off
beams.
32 If the saw blade is locked: first switch off the machine
before you attend to the fault.
33 Avoid workpieces hitting back in your direction by
taking the following measures:
- always use sharp saw blades;
- do not saw too small workpieces;
- never release the workpiece before it has been
completely pushed through the saw;
- always adjust the guide parallel to the saw blade;
- never remove the saw protection;
34 Before you continue sawing, ensure that you are stan-
ding firmly and that your hands are in the required
position.
35 Never use thinners to clean the machine. Only use a
damp cloth for cleaning.
36 Do not use saw blades which are damaged or defor-
med.
37 Replace table insert when worn.
UK
English
2 Ferm
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ferm TSM1006 - FZT-250N wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info