Ferm
101
Indstilling af vinkelanslaget før savning
Fig. 8
Sørg for at vinkelanslaget er tæt på savklingen uden at berøre den.
Støvudsugning
Fig. 9
Sæt en støvsuger til udsugningsåbningen.
Kontroller regelmæssigt støvsugerbeholderen for indhold. Tøm regelmæssigt støvsugeren.
Til-Fra-kontakt
Fig. 10
I = Til
O = Fra
Bemærk: Kontakten er en sikkerhedskontakt. Ved strømsvigt SLUKKES maskinen, men
den TÆNDES ikke af sig selv, efter at strømmen er kommet tilbage.
Savning
Fig. 11
Indstil parallelanslaget eller vinkelanslaget til de ønskede mål.
TÆND for støvsugeren.
Efter at have TÆNDT skal De føre arbejdsemnet langsomt med minimalt tryk mod
savklingen. Brug ikke for mange kræfter, lad saven arbejde for Dem.
Hold arbejdsemnet ordentligt fast.
Fjern trærester med hånden fra den kørende maskine.
Inden De fjerner afskårne stykker mellem parallelanslag og savklinge, skal De absolut
SLUKKE maskinen og afvente stilstand eller bruge skubbestok.
Benyt skubbestokken ved korte abejdsemner.
Overhold alle sikkerhedsanvisningerne i denne betjeningsvejledning, også selvom de
forekommer Dem besværlige.
Arbejd med omhu og tag i betragtning, at en betjeningsvejledning ikke kan beskrive alle
mulige former for arbejde med en rundsav.
Pas især på ved affaldstræ, bygningstræ osv., samt skjulte søm eller andre metaldele i
træet. Fjern dem inden savning.
Benyt skubbestokken ved korte arbejdsemner.
5. SERVICE OG VEDLIGEHOLDELSE
Regelmæssig pleje og vedligeholdelse
Disse apparater er konstrueret til langtidsdrift med minimal vedligeholdelse. Hvorvidt
driften er tilfredsstillende afhænger af den rette apparatpleje og regelmæssig rensning.
GB
D
NL
F
E
P
I
S
FIN
N
DK
Ferm
5. Store unused power tools in a safe place
• Unused power tools should be stored in a dry place, either on a high shelf or under
lock and key, out of the reach of children.
6. Do not overload your power tool
• They work better and safer when used within the specified power range.
7. Use the correct power tool for the job
• Do not use underpowered machines for heavy work.
• Do not use the power tool for purposes for which it is not designed.
8. Wear suitable clothing
• Do not wear loose-fitting clothing or jewellery as this might become caught in moving
parts.
• Non-slip footwear is recommended when working outdoors.
• Wear a hairnet if you have long hair.
9. Use protective equipment
• Wear safety glasses.
• Wear a breathing mask for dusty work.
10. Connect the dust extraction system
• If a dust extraction and collection system exists, then make sure that this is correctly
connected and used.
11. Do not use the power cable for other than the intended purpose
• Do not use the cable for pulling the power plug out of the power socket. Protect the
power cable from heat, oil and sharp edges.
12. Properly secure the workpiece
• Use clamps or a vice for securing the workpiece. This is much safer than holding it by
hand.
13. Avoid abnormal working postures
• Ensure that you have a stable posture and be sure to keep your balance.
14. Look after your tools
• Keep cutting tools sharp and clean, so that you can work better and more safely.
• Follow the instructions for lubrication and changing tool bits.
• Regularly check the power cable of the power tool and have it replaced by a qualified
electrician if it is damaged.
• Regularly check any extension cables you may use and replace these if they are
damaged.
• Keep the handles dry, clean, and free from oil and grease.
15. Remove the power plug from the power socket
• When not using the power tool, when performing maintenance, and when changing
tools such as saw blades, drill bits, router bits etc.
16. Do not leave chuck keys in the tool
• Always check that the chuck key and any adjustment tools are removed before
switching on the tool.
17. Avoid unintentional starting
• Ensure that the power switch is off before plugging the power plug into the power
socket.
18. Use approved extension cables when working outdoors
• Only used extension cables that are approved for outdoor use, and which are labelled
as such, when working outdoors.
8
GB
D
NL
F
E
P
I
S
FIN
N
DK
