Bedienungsanleitung Ferm TSM1032 (Seite 7 von 48) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

510129

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

designed for that purpose (a peg cutter or

milling machine) and not with a saw bench.

• Exercise care when sawing waste or

firewood.

• Waste or firewood often requires less careful

sawing, so there is a danger that you may not

be quite so alert to irregularities in the wood

and impose too much pressure on the saw.

• Use a table extender for large workpieces.

• When sawing large workpieces, support the

workpiece at table level with a table extender.

Examples of problems arising from improper

use of the saw bench

• Contact with rotating saw blade

• This can occur when the protective elements

(such as the protective hood, the protection

under the table surface, the riving knife, the

push stick) are missing or are used

improperly. Improper operation of the

protective elements can result in accidents.

When the machine is switched off, the saw

blade may continue to rotate. There is a risk of

your not noticing this because the appliance

falls silent. That is why the protective hood is

so important.

• Recoil of the workpiece

• When the workpiece recoils it may hit those in

the surrounding area at high speed. This may

result in serious or even fatal injury. The

workpiece may recoil for the following reasons

(or a combination of them):

• The saw does not protrude far enough

above the table surface, causing the

workpiece to be guided directly into

contact with the teeth of the saw that is

itself moving in the direction of the user.

• The workpiece seizes on the saw

because the riving knife is not fitted or

incorrectly adjusted.

• There is no auxiliary saw rip fence

(straight edge) or it is adjusted incorrectly.

Because of this the wood may become

stuck between the main rip fence and the

rotating saw blade.

• Rotating saw blade breaks

• This can be caused by the following

factors:

• An improper sawing procedure;

• An improperly adjusted saw blade;

• An improper method of operation;

• Processing material that is unsuitable for

the saw bench.

• Metal parts under voltage

Defective electrical installation may result in

metal parts coming under voltage and causing

fire.

• Damage to hearing when noise level is too

high

A noise level that is too high may cause

damage to the hearing of persons who are

often close to the saw bench.

• Release of harmful wood dust.

Release of harmful wood dust or glue vapours

may pose health risks. Connect a vacuum

cleaner to the saw bench.

Turn the appliance off immediately in the event of:

• A faulty mains plug, mains flex or flex

damage.

• A faulty switch.

• Smoke or smell from scorched insulation.

• Seizing of the saw.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Class ll machine. Your machine is double

insulated; therefore no earthwire is

required.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm

. When using a cable

reel always unwind the reel completely.

3. Assembly instructions

Selecting the saw blade

Select a saw blade that meets European standard

EN847. Make sure that it has the proper teeth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm TSM1032 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ferm TSM1032

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info