Bedienungsanleitung Ferm TSM1037-SGM1026 (Seite 7 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

812771

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Installing / replacing soldering tip

Fig. C

1. To install the soldering tip, hold the soldering

iron and slide the soldering tip (1) over the

heating element (10), then slide the soldering

tip holder (2) over the soldering tip until the

threaded part. Then screw clockwise into the

soldering tip holder (2) tightly.

2. To replace the soldering tip (1), unscrew the

soldering tip holder (2) counter clockwise until

is comes off. Take out the soldering tip (1) and

replace with the new soldering tip. Then repeat

the step as described in step 1.

4. OPERATION

During initial use, the soldering iron may

generate a light smoke due to the

elements heating.

The battery must be charged before first

use.

Caution, danger of burns! Do not touch

the hot soldering tip when in operation.

When starting work:

1. Take out the soldering iron from the soldering

iron base (11).

2. Hold the soldering iron in your hand like a pen,

with grip on de handle (4).

3. Press and hold the on/off switch (5) to turn on

the machine. The LED working lights (3) will

turn on to bright up the working area.

4. The display (6) will light up and the machine

will automatically heat the tip to a minimum

working temperature of 200°C. To increase

working temperature press the “+” Increase

button (7). To decrease working temperature

press the “-” Decrease button. Working

temperature of machine can be set between

200°C and 450°C.

5. The soldering tip will keep the temperature

for 10min, after this the soldering iron stops

automatically and the display (6) and the LED

working lights (3) will turn off.

6. To continue using the soldering iron, repeat

step 2 to 4.

Working Instructions

1. In order to obtain a perfect soldering point, the

soldering point must be completely clean and

free of grease.

2. Before initial use, the soldering tip has to be

tin-coated, i.e. coated with soldering tin. Only

good tin coating ensures perfect soldering and

heat transfer.

3. Make sure that the soldering tip is always

clean and free of scaling and excess soldering

tin. Clean the soldering tip regularly with a wet

sponge. Never use a file for this purpose.

4. Before soldering, establish a mechanical

connection between the metals which are

to be connected together if possible. For

example, twist the wires together so that they

do not slip. In this way you will obtain stable

soldering points and avoid heat damage

through excessive soldering.

5. For the soldering of two metals, hold the

soldering tip on the connection point and

briefly add some solder. The solder melts and

flows into the soldering point. If the tin has

spread, remove the soldering iron and allow

the soldering point to cool down without

vibrations. Never heat solder directly and do

not use too much solder.

6. In the case of electronic components, the

parts to be soldered must not be heated too

much in order to avoid damage.

7. Place the soldering tip on a heat-resistant

surface or insert it into the base during

working.

8. Cleaning the solder tip on the wet sponge after

work and put the soldering iron back into the

base.

Switching off:

1. Press and hold the on/off switch (5) to turn off

the machine. Make sure that the hot soldering

tip (1) does not touch anything until it has

cooled down.

2. Cleaning the solder tip on the wet sponge (12).

3. Put the soldering iron back on the soldering

iron base (11).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm TSM1037-SGM1026 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info