Bedienungsanleitung Ferm VCM1007 (Seite 10 von 36) (Deutsch, Englisch, Holländisch, Französisch)

812765

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

of complaints. The vapours can irritate the

respiratory system.

d) Use the battery only in conjunction with your

FERM AX-POWER product. This measure

alone protects the battery against dangerous

overload.

e) The battery can be damaged by pointed

objects such as nails or screwdrivers or by

force applied externally. An internal short

circuit can occur and the battery can burn,

smoke, explode or overheat.

SAFETY WARNINGS FOR CHARGER

Intended use

Only charge the recommended 20V Li-ion

rechargeable battery packs. Other types of

batteries may burst causing personal injury and

damage.

a) The appliance is not to be used by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they

have been given supervision or instruction.

b) Children being supervised not to play with

the appliance.

c) Do not recharging non-rechargeable batteries!

d) During charging, batteries must be placed in

the well ventilated area!

Electrical safety

Always check that the voltage of the

power supply corresponds to the voltage

on the rating plate.

• Do not use the machine if the mains cable or

the mains plug is damaged.

• Only use extension cables that are suitable

for the power rating of the machine with a

minimum thickness of 1.5 mm2. If you use an

extension cable reel, always fully unroll the

cable.

2. MACHINE INFORMATION

Intended use

Your handheld vacuum cleaner is suitable for dry

vacuuming with the aid of the accompanying

HEPA filter. The vacuum is not intended for the

vacuum of flammable, explosive or hazardous

dusts. The vacuum cleaner may only be used

and stored indoors, in private households and in

enclosed spaces in adomestic environment at

room temperature. The device is not suitable for

commercial or industrial use.

Technical specifications

Model No. VCM1007

Voltage 20 V

Suction force ≥7 kPA, 4 m³/min

Container capacity 600 ml

Tube diameter Ø 32 mm

Weight 2.3 kg

Model No. CDA1154

Battery type Lithium-Ion

Voltage 20V

Capacity 2.0 Ah

Recommended charger CDA1156, CDA1157,

CDA1175

Weight 0.3 kg

Model No. CDA1156

Charger input 100-200V~ 50/60Hz

Max 1A

Charger output 21.5V 1.7A

Rechargeable battery pack 20V Li-Ion 1.5Ah

Charging time 1.5Ah battery 60 minutes

Charging time 2.0Ah battery 90 minutes

Charging time 4.0Ah battery 120 minutes

Recommended batteries CDA1158, CDA1154,

CDA1155

Weight 0,15 kg

Only use the following batteries of the AX-POWER

20V battery platform. Using any other batteries

could cause serious injury or damage the tool.

CDA1158 20V, 1.5Ah Lithium-Ion

CDA1154 20V, 2Ah Lithium-Ion

CDA1155 20V, 4Ah Lithium-Ion

The following charger can be used to charge

these batteries.

CDA1156 Charger adapter

CDA1157 Quick charger

CDA1175 Quick charger

The batteries of the AX-POWER 20V battery

platform are interchangeable with all the FERM

AX-POWER battery platform tools.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm VCM1007 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info