Bedienungsanleitung Ferm WSM1009 (Seite 7 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

510116

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

● Neverputthemachinedownonatableora

workbench before it has been switched off.



Kickback is the upward and backward movement

of the cutting discs when the cutting discs

unexpectedly touch an object. Securely hold the

machine with both hands during use. Keep your

attention focused on the operation.

Kickback is usually caused by:

- unintentionally touching hard objects or

materials with the rotating cutting discs;

- blunt cutting discs;

- cutting discs that are not properly mounted;

- cutting into a previous cut;

- a lack of attention to the operation;

- an instable stance.



● Donotlookdirectlyintothelaserbeam.

● Donotpointthelaserbeamhumansoranimals.

● Donotpointthelaserbeamatstrongly

reectingmaterial.

● Donotinserthardobjectsintothelaseroptics.

● Cleanthelaseropticswithasoft,drybrush.

● Onlyhavethelaserrepairedbyaqualied

technician.



Always check that the voltage of the

power supply corresponds to the voltage

on the rating plate.

● Donotusethemachineifthemainscableor

the mains plug is damaged.

● Onlyuseextensioncablesthataresuitablefor

the power rating of the machine with a

minimum thickness of 1.5 mm

.Ifyouusea

extension cable reel, always fully unroll the

cable.



Ifthemoulded3-pinplugattachedtotheunitis

damaged and needs replacing, it is important that

it is correctly destroyed and replaced by an

approvedBS1363/13Afusedplugandthatthe

following wiring instructions are followed.

The wires in the mains cable are coloured in

accordance with the following code:

blue neutral

brown live

As the colours of the wires in the mains cable of

the unit may not correspond to the coloured

markings identifying the terminals in the plug,

proceed as follows:

- The wire which is coloured blue must be

connected to the terminal which is marked with

the letter N or coloured black.

- The wire which is coloured brown must be

connected to the terminal which is marked with

theletterLorcolouredred.

TECHNICAL DATA

 

Mainsvoltage V~ 230

Mainsfrequency Hz 50

Powerinput W 1,700

No-load speed min

-1

 4,000

Slotwidth mm 14/19/29

Slotdepth mm 0-28

Cuttingdisc

 Diameter mm 125

Bore mm 22.2

Spindlethread  M12

Protectionclass  IP20

Laserclass 2

Battery type AAA

Weight kg 5.1

NOISE AND VIBRATION

 

Soundpressure(L

) dB(A) 109

Acousticpower(L

) dB(A) 120

Uncertainty(K) dB(A) 3

Vibration(maingrip) m/s

 1.32

Vibration(auxiliarygrip) m/s

 2.86

Uncertainty(K) m/s

1.5

Wear hearing protection.



The vibration emission level stated in this instruction

manual has been measured in accordance with a

standardisedtestgiveninEN60745;itmaybeused

to compare one tool with another and as a

preliminary assessment of exposure to vibration

when using the tool for the applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

maysignicantlyincreasetheexposurelevel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm WSM1009 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info