Bedienungsanleitung Ferrari Watches (Seite 14 von 49) (Englisch)

757297

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

(10) AUTOMATIC CHRONOGRAPHS MODELS

Includes Pilota and Aspire Automatic Swiss Made Limited Edition watch models

LEGEND

H – Hour hand

M – Minute hand

S – Small seconds hand

C – Chronograph seconds counter

D – Chronograph l 2-hour counter

E – Chronograph 30-minutes counter

J – Date display

A – Chronograph push-button [start/stop)

B – Chronograph push-button [reset)

l, 2, 3 – Crown positions

These automatic chronograph models feature a ﬁne 25-jewel ETA

caliber A07.2 l l self-winding mechanical chronograph movement

with 48-hour power reserve, minute counter (up to 30), hour counter

(up to 12), and small seconds subdials; center-mounted chronograph

seconds hand, and date display. They can be used to time an event

up to l 2 hours, 30 minutes and 59 seconds in duration to the

nearest second.

MANUAL WINDING/ SCREW-DOWN CROWN

The motion of your arm during normal daily activities should be

sufﬁcient to keep the movement of your automatic chronograph

wound. However, if you have not worn it for more than 48 hours

and the watch has stopped, you will need to unlock the screw-down

crown (select models), and wind the watch by hand before setting

the time/date or operating the chronograph functions:

To manually wind your timepiece:

1. On models equipped with a screw-down crown, unlock it by

turning it counterclockwise approximately six rotations.

2. With unlocked crown in position l, turn the crown clockwise

approximately 20 revolutions to wind the movement.

3. Reset time/date following instructions below.

NOTE: After time/date setting, the screw-down crown found on select

models must be screwed back down into the case to ensure water

resistance: Press in gently while turning crown clockwise approximately

six rotations until you begin to feel resistance. Do not over tighten.

TIME/DATE SETTING

To set the time:

l. Pull crown out to position 3; watch stops.

2. Turn crown in either direction to move hands to desired time,

making sure that the date changes at midnight, not at noon.

NOTE: The date will advance by one each time midnight is passed

when adjusting the time.

3. Push crown back in to position l; watch restarts.

To adjust the date rapidly:

CAUTION: As with all mechanical watches equipped with a calendar

feature, never adjust the date rapidly. [with crown in position 2) when

the time indicated on the dial is between 9PM (21 :00) and 3AM

(03:00); doing so could damage the mechanism.

l. Pull crown out to position 2.

2. Turn crown clockwise to change the date.

3. When correct date is displayed in window J, push crown back in to

position l, and screw crown back down.

CHRONOGRAPH FUNCTIONS

Overview:

Use buttons A and B to operate the chronograph. Pressing button A

the ﬁrst time will start the chronograph. While the chronograph is

running, the three chronograph counter hands will sweep continuously,

indicating the number of currently elapsed seconds (hand C), minutes

up to 30 (hand E), and hours up to 12 (hand D). Pressing button A

a second time will stop the chronograph. Pressing button B will reset

hands C, E and D to zero.

IMPORTANT: The crown must be in position l, and hands must be at

zero before the chronograph is started. If necessary, press button B

to reset to zero. DO NOT use chronograph while crown is pulled out

to position 2 or 3. DO NOT operate chronograph buttons A and B

while timepiece is under water.

NOTE: Hand S is the seconds hand for standard time keeping. It is not

part of the chronograph function, and therefore will run continuously

while the crown is in position l.

Simple chronograph functions:

l. Press button A to start chronograph.

2. Press button A a second time to stop chronograph and read

elapsed time.

3. Press button B to reset chronograph to zero.

Accumulated time functions:

To measure the combined time of a series of shorter events, for

example the actual playing time of a football match, where play is

repeatedly interrupted:

l. Press button A to start chronograph.

2. Press button A a second time to stop chronograph and read the

elapsed time.

1 – 2 – 3

Figure A

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferrari Watches Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ferrari Watches

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info