Bedienungsanleitung Ferrari Watches (Seite 23 von 49) (Englisch)

757297

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

(17) QUARTZ ANALOG CHRONOGRAPHS 1/5 OF A SECOND – TYPE A

with center-mounted chronograph ﬁfths-of-a-second hand, small chronograph minutes counter, and small seconds and 24-hour hands

Includes select Heritage, Race Day and Scuderia quartz chronograph models

LEGEND

H – Hour hand

M – Minute hand

S – Small seconds hand

C – Chronograph 1/5-of-a-second hand

E – Chronograph minutes counter

F – 24-Hour hand

D – Date display

A – Start/Stop button

B – Reset button

1, 2, 3 – Crown positions

These chronograph models feature a center-mounted ﬁfths-of-a-

second chronograph hand, minute counter (up to 60), small seconds

and 24-hour hands, and date. They can be used to time an event up

to 60 minutes in duration to the nearest 1/5 of a second.

To set the TIME:

1. Pull crown out to position 3; watch (small seconds hand S) stops.

NOTE: If crown is pulled to position 3 while chronograph is running,

timing will continue and chronograph hands C and E will continue

to move.

2. Turn crown in either direction to set hour H and minute M hands

to desired time taking AM/PM into account.

3. Push crown back in to position 1; watch restarts.

To set the DATE:

1. Pull crown out to position 2.

2. Turn crown clockwise to set date D.

CAUTION: Do not set date D when hour and minute hands are

between 9:00 PM and 3:00 AM; doing so could damage the calendar

mechanism. If you must reset date during those hours, ﬁrst move

hour and minute hands to any time outside that period, reset the

date, and then reset hands to correct time.

3. Push crown back in to position 1.

To operate the CHRONOGRAPH:

This chronograph is able to measure and display time in

1/5-of-a-second increments up to a maximum of 60 minutes.

It will stop automatically after reaching 60 minutes.

Simple chronograph functions:

1. Press button A to start chronograph; chronograph hands C and

E start moving.

2. Press button A a second time to stop chronograph; read elapsed

time indicated by hands C and E.

3. Press button B to reset chronograph hands to zero.

Accumulated time functions:

To measure the combined time of a series of shorter events, for

example the actual playing time of a football game, where play is

repeatedly interrupted:

1. Press button A to start chronograph.

2. Press button A a second time to stop chronograph and read

elapsed time.

3. Press button A again to resume measurement.

4. Press button A a fourth time to stop chronograph again, and

read new elapsed time.

NOTE: Each time you stop chronograph, chronograph hands will

indicate total accumulated elapsed time.

5. Repeat steps 1 and 2 to add each additional interval of time.

6. After you have taken your ﬁnal accumulated time reading,

press button B to reset chronograph hands to zero.

To RESET Chronograph Hands:

If the chronograph hand positions are incorrect, the hands can be

realigned to zero by pressing button A once to start the chronograph,

pressing button A a second time to stop the chronograph, and then

pressing button B to return both chronograph hands to zero.

1 – 2 – 3

Figure A

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferrari Watches Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ferrari Watches

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info