734924
21
Zoom out
Zoom in
Vorherige Seite
1/31
Nächste Seite
Cleaning and maintenance
21
Scraping
For best results, the scraper
13
must be sharpened regularly.
Work on a soft base (e.g. wood) at a flat angle and while applying minimal
contact pressure. Otherwise, the scraper could cut into the surface.
Select a moderate to high oscillation rate for scraping.
Sanding
Select a high oscillation rate for sanding.
Follow the instructions below for proper sanding:
Move the multifunction tool parallel and circularly over the surface or alternately
in longitudinal and transverse directions.
The material removal rate and sanding quality are primarily determined by
the selection of the sanding sheet
14
, the preselected oscillation rate and the
pressing force.
Press the multifunction-tool evenly and not too hard against the workpiece.
Pressing too strongly does not increase performance.
Only work with the tip or an edge of the sanding plate
11
to sand profiles and
fillets. The sanding sheet can heat up significantly when sanding individual
points. Reduce the oscillation rate and contact pressure and let the sanding sheet
cool off regularly.
Do not use the multifunction tool with liquid polishing agents or abrasives.
If only one corner is worn down, move the sanding sheet
14
by 120°.
Cleaning and maintenance
WARNING!
Risk of injury!
Accidentally starting the multifunction tool may result in severe
injury.
Take the rechargeable battery out of the multifunction tool
before cleaning or performing any maintenance on the
multifunction tool.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ferrex FAM 20-I wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Ferrex FAM 20-I

Ferrex FAM 20-I Bedienungsanleitung - Deutsch, Französisch, Italienisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info