Bedienungsanleitung Ferrex PM2006H (Seite 9 von 40) (Englisch)

724604

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

4. Power tool use and care

a. Do not force the power tools. Use the correct power tool for your

application. The correct power tool will do the job better and safer at

the rate for which it was designed.

a. Do not use the power tool if the switch does not turn it “on” and

“o”. Any power tool that cannot be controlled with the switch is

dangerous and must be repaired.

a. Disconnect the plug from the power source and/or the battery

pack from the power tool before making any adjustments,

changing accessories, or storing power tools. Such preventive

safety measures reduce the risk of starting the power tool accidentally.

a. Store idle power tools out of the reach of children and do not

allow persons unfamiliar with the power tool or these instructions

to operate the power tool. Power tools are dangerous in the hands of

untrained users.

a. Maintain power tools with care. Check for misalignment or binding

of moving parts, breakage of parts and any other condition that may

aect the power tool’s operation. If damaged, have the power tool

repaired before use. Many accidents are caused by poorly maintained

power tools.

a. Keep cutting tools sharp and clean. Properly maintained cutting

tools with sharp cutting edges are less likely to bind and are easier

to control.

a. Use the power tool, accessories and tool bits etc. in accordance

with these instructions, taking into account the working

conditions and the work to be performed. Use of the power tool for

operations dierent from those intended could result in a hazardous

situation.

Additional safety rules for Petrol Chainsaws

• Never cut into the ground.

• Never cut into wire fences.

• Never cut into saplings.

• Never cut into prepared wood.

• Use the chainsaw to cut only wood.

• It is advisable to provide a support for the chainsaw when cutting

branches. Do not cut using the bar point and beware of branches

under tension.

• Children under 18 must not use chainsaws.

• Keep people away from the chainsaw when in use.

• Check the following conditions before beginning work:

– There should be no people in the felling area.

– Make sure there is a second person within calling distance.

– The working area should be free from obstacles.

• Wear suitable clothes which do not hinder movement.

• Use specic protection during operations involving head, hands, feet,

eyes and ears.

• It is recommended the use of a helmet with a visor during felling, branch

cutting and chopping operations.

• Wear gloves with an external protection when using the chainsaw.

• Use ear protection to prevent hearing injuries.

• Wear safety boots when using the chainsaw.

• During transport the brake must be applied to avoid accidental start-up.

• Do not use the chainsaw in rainy or windy conditions or in poor light.

• Find a suitable position before beginning work.

• When working on slopes, the saw operator must stand beside or above

the wood to cut, i.e. felled trees.

• Use the chainsaw holding it rmly with both hands.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferrex PM2006H Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info