Bedienungsanleitung Festool BHC 18 Li - 2021 (Seite 15 von 76) (Alle Sprachen)

778636

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

► Before working with the CENTROTEC tool

chuck, set the selector switch [1-5] to the

drill symbol.

8.3 Auxiliary handle [1-11]

Always use the additional handle [1-11] to

guarantee a safe, non-tiring working pos

ture.

Attaching the additional handle [7]

► Attach the additional handle [1-11] to the

neck of the gear housing.

► Turn the grip anticlockwise until the addi

tional handle [1-11] is secured in position.

8.4 Depth stop [1-12]

The drilling depth can be adjusted using

the depth stop [1-12].

Attaching the depth stop [1-12]

► Unscrew the additional handle [1-11] by

turning the grip anticlockwise.

► Insert the depth stop [1-12] in the addition

al handle [1-11].

► Pull out the depth stop [1-12] until the dis

tance between the tip of the drill and the tip

of the depth stop corresponds to the desired

drilling depth.

► Tighten the grip on the additional handle

[1-11] again.

8.5 Extraction

Please observe the safety regulations applica

ble in your country for dust. The relevant limit

values must be observed at the workstation. A

dust extractor may be required for correspond

ing dust exposure and depending on regula

tions. Festool offers a drilling dust nozzle in the

accessories system.

9 Working with the machine

WARNING

Risk of injury

► Always secure the workpiece in such a

manner that it cannot move while being

machined.

9.1 On/Off switch [1-4]

Press = ON, release = OFF

The speed of the machine depends on how

far the on/off switch is pressed in.

9.2 Belt clip [1-6]

The belt clip (right/left) allows the tool to be at

tached to work attire for brief periods.

9.3 Acoustic warning signal

Acoustic warning signals sound and the power

tool switches off in the following operating

states:

peep

Battery flat or power tool overloaded:

► Change the battery

► Reducing the load on the power tool

10 Service and maintenance

WARNING

Risk of injury, electric shock

► Always remove the battery pack from the

power tool before performing any mainte

nance or service work.

► All maintenance and repair work which re

quires the motor housing to be opened

should always be carried out by an author

ised service workshop.

Customer service and repairs must

only be carried out by the manufac

turer or service workshops. Find the

nearest address at:

www.festool.co.uk/service

Always use original Festool spare

parts. Order no. at:

www.festool.co.uk/service

EKAT

235

To ensure constant air circulation, always keep

the cooling air openings in the motor housing

clean and free of blockages.

Keep the contacts on the power tool, charger

and battery pack clean.

11 Environment

Do not dispose of the device in the

household waste! Recycle devices, ac

cessories and packaging. Observe appli

cable national regulations.

EU only: In accordance with the European Di

rective on waste electrical and electronic

equipment and implementation in national law,

used power tools must be collected separately

and handed in for environmentally friendly re

cycling.

Information on REACH: www.festool.com/reach

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool BHC 18 Li - 2021 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info