Bedienungsanleitung Festool C12-12.0 V (Seite 16 von 86) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

574904

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

power supply (danger of deep discharg-

ing).

- A new battery pack or a battery pack not

used for a longer period of time reaches

it full capacity after about 5 charging and

discharging cycles.

- Battery packs should, before charging, be

fully discharged if possible.

Continuous starting of the charging process

shortens the lifespan of the batteries.

- A considerably reduced time of operation

per charging shows that the battery pack is

used up an should be replaced by a new one.

- NiCd battery packs that are not used for

longer periods should be stored in a dis-

charged state.

Special instructions for NiMH battery

packs:

- The output of NiMH battery packs drops

noticeably at ambient temperatures below

0° C or above 45° C.

- Do not overload the tool (do not load the

tool excessively so that it comes to a stand-

still).

- Even if NiMH battery packs are not used,

recharge them approx. every 4 months so

that they retain their full capacity.

- NiMH battery packs should be left for 60

min. in the charger after every 10th fast

charge to compensate any differences in

capacity between the cells.

- Because NiMH battery packs discharge

auto-matically, store them preferably at

ambient temperatures of between 0° C and

25° C.

7 Recycling battery packs

Never throw spent battery packs

into domestic waste containers!

Return spent or defective battery packs

to dealers, the Festool after-sales service

department or approved waste disposal fa-

cilities. This ensures that they are correctly

recycled.

8 Warranty

Our equipment is under warranty for at

least 12 months with regard to material or

production faults in accordance with national

legislation. In the EU countries, the warranty

period is 24 months (an invoice or delivery

note is required as proof of purchase). Dam-

age resulting from, in particular, normal wear

and tear, o-verloading, improper handling, or

caused by the user or other damage caused

by not following the operating instructions,

or any fault acknowledged at the time of

purchase, is not covered by the warranty.

Damage caused by the use of non-original

accessories and consumable material (e.g.

sanding pads) is also excluded. Complaints

will only be acknowledged if the equipment

has not been dismantled before being sent

back to the suppliers or to an authorised

Festool customer support workshop. Store

the operating instructions, safety notes,

spare parts list and proof of purchase in a

safe place. In addition, the manufacturer‘s

current warranty conditions apply.

Note

We reserve the right to make changes to

the technical data contained in this infor-

mation as a result of ongoing research and

development work.

9 EU Declaration of Conformity

Cordless drill/

screwdriver

Serial no.

C12 490454

Year of CE mark: 2005

We declare under sole responsibility that this

product complies with the following norms

or normative documents: EN 60745-1, EN

60745-2-1, EN 60745-2-2, EN 55014-1

in accordance with the regulations stipu-

lated in Directive 98/37/EC (until 28 Dec.

2009), 2006/42/EC (from 29 Dec. 2009),

2004/108/EC.

Charger Serial no.

LC 45 491573, 491815

Year of CE mark: 2003

We declare under sole responsibility that this

product complies with the following norms

or normative documents: EN 60335-1, EN

60335-2-29, EN 61000-3-2, EN 61000-3-3,

EN 61204-3 in accordance with the regula-

tions stipulated in Directive 2004/108/EC,

2006/95/EC.

Dr. Johannes Steimel

Head of research and development

Festool GmbH, Wendlingen, Germany

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool C12-12.0 V Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info