Bedienungsanleitung Festool CS70E-S PR (Seite 16 von 110) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

573130

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

power tool.

Increase possible for other applications, with oth-

er insertion tools or if not maintained adequately.

Take note of idling and downtimes of machine!

5.3 Other risks

In spite of compliance with all relevant design

regulations, dangers may still present them-

selves when the machine is operated, e.g.:

- workpiece parts being thrown off,

- parts of damaged tools being thrown off,

- noise emissions,

- wood dust emissions.

6 Commissioning

WARNING

Risk of accident if the machine is operated us-

ing unauthorised voltages or frequencies.

The mains voltage and the frequency of the

power source must correspond with the

speciﬁ cations on the machine’s name plate.

In North America, only Festool machines with

voltage speciﬁ cations of 120 V may be used.

6.1 Assembling the machine

Setting up the machine

Ensure that the ﬂ oor around the machine is

level, in good condition and free of loose objects

(e.g. chips and offcuts).

 The machine can be set up with or without

the legs unfolded. To unfold the legs:

Unscrew the rotary knobs [1-12] all the way.

Unfold the legs [1-1] and tighten the rotary

knobs [1-12] again.

If the machine wobbles, turn the end cap [1-9] on

one leg to adjust the length so that the machine

stands securely.

Fitting the knob

Screw the rotary knob [2-6] supplied anti-

clockwise into the guide rod.

Fitting the protective cover

Pull the spacer wedge [1-6] sharply upwards

[7-2] to move to the top catch position.

Secure the top protective cover supplied to the

spacer wedge in this position using the rotary

knob [1-11].

Transport

Engage the saw unit in the zero position.

Remove all attachments from your saw and

wind up the cable on the cable holder.

Fold up the legs.

6.2 On/Off switch

 We recommend using a 16 A fuse because of

the performance of the motor.

To switch on: Press the green "On" switch [1-

2]. The red button is the "Off" switch.

 A switch-on lock is available as an accessory

to prevent the machine from switching on

unintentionally.

7 Machine settings

WARNING

Risk of accident, electric shock

Always pull the plug out of the socket before

performing any type of work on the machine.

7.1 Electronics

The machine features full-wave electronics with

the following properties:

Smooth start-up

The electronically controlled smooth start-up

function ensures that the machine starts up

smoothly.

Speed control

You can regulate the rotational speed (CS 70 EB

only) steplessly between 2000 and 4200 rpm us-

ing the adjusting wheel [2-1]. This enables you to

optimise the cutting speed to suit the respective

material.

only CS 70 EB

[rpm] # n

[rpm]

1 ~ 2000 4 ~ 3300

2 ~ 2400 5 ~ 3800

3 ~ 2800 6 ~ 4200

The preselected motor speed remains constant

through electronic control. This ensures a uni-

form cutting speed even when under strain.

Overload safety device

The machine power supply is limited if the ma-

chine is overloaded to extremes. The power sup-

ply is interrupted permanently if the motor is

blocked for a few moments. Switch the machine

off and on again to reset.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool CS70E-S PR Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info