Bedienungsanleitung Festool CS70EB-S PR (Seite 15 von 110) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

573129

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

P R E C I S I O -

- Use a suitable device to support long work-

pieces and ensure that they are horizontal.

- Pull the plug from the main power socket be-

fore changing tools and rectifying faults such

as removing trapped splinters.

- Do not remove offcuts or other workpiece

parts from the cutting area while the tool is

still running and until the saw blade stops.

- If the saw blade is blocked, switch the machine

off immediately and disconnect the mains

plug. Do not remove the jammed workpiece

until you have done this.

- Cutting rebates or grooves is only permitted

with a suitable protective device ﬁ tted, e.g. a

protective tunnel over the saw table.

- Do not use circular saws for cutting slots

(grooves in workpiece).

- Before transporting the machine, make sure

that the top protective guard covers the top

section of the saw blade.

- Do not use the top protective cover as a handle

for transportation!

- When not in use, store the push stick in the

holder provided on the machine.

5.2 Emission levels

Noise emissions have been measured in accord-

ance with the speciﬁ cations in EN 61029. These

speciﬁ cations apply for operation as a trimming

saw and bench-mounted circular saw.

Noise level

Sound power level, idling 91 dB(A)

Sound power level,

during operation 103 dB(A)

Measuring uncertainty allowance K = 3 dB

Workplace emission levels

Workplace emission, idling 77 dB(A)

Workplace emission,

during operation 90 dB(A)

CAUTION

The noise produced during work may damage

your hearing.

Wear ear protection!

Measured acceleration < 2.5 m/s²

The speciﬁ ed emissions values (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary

estimates regarding vibration and noise loads

during operation.

– They represent the primary applications of the

- The cutting width of the saw blade must be

larger and the standard blade thickness nar-

rower than the thickness of the spacer wedge

(2.2 mm).

- The tool must be suitable for the material to

be processed.

- Deformed or cracked saw blades and saw

blades with blunt or broken cutting edges

must not be used.

- Transport and store the tools in a suitable re-

ceptacle;

- Only use the machine if all safety devices are

in their correct positions, the machine is in

good condition and has been well maintained.

- Replace a worn or damaged (e.g. bedded in)

tabletop immediately.

- Operating personnel must have received ade-

quate training in the use, set-up and operation

of the machine.

- Faults on the machine, including the separat-

ing guards or the tool, must be reported to

maintenance staff immediately upon discov-

ery. The machine must not be used until the

fault has been eliminated.

Wear suitable personal protec-

tive equipment: ear protection

to reduce the risk of hearing

loss, safety goggles, a dust

mask to prevent inhalation of

harmful dust, protective gloves

when working with raw materials and when

changing tools.

- To minimise noise, the tool must be sharpened

and all noise reducing elements (covers etc.)

must be properly adjusted.

- When cutting wood, connect the machine to a

dust extractor corresponding to EN 60335-2-

69, dust category M.

- Never process material containing asbestos.

- Make sure that there is adequate lighting in

the room or workplace.

- Always assume the correct position before

starting work:

- front at the operating end,

- facing the machine,

- next to the cutting line.

- Use the accompanying workpiece holder to

guide the workpiece accurately past the saw

blade.

- Use the accompanying spacer wedge and pro-

tective cover. Make sure the cover is set as de-

scribed in the operating instructions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool CS70EB-S PR Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info