Bedienungsanleitung Festool CT 36 E HEPA CLEANTEX (Seite 14 von 93) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

499154

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

CLEANTEX

6.2 Switch on/off

Insert the plug into an earthed socket.

The switch [1-7] serves as an on/off switch.

Switch position "0"

Appliance socket [1-3] is disconnected from

the power, mobile dust extractor is switched

off.

"MAN" switch position

Appliance socket [1-3] is connected to the

power, the mobile dust extractor starts.

"Auto" switch position

Appliance socket [1-3] is connected to the

power, the mobile dust extractor starts when

the connected tool is switched on.

7 Settings

7.1 Connecting electric power tools

Connect the electric power tool to the ap-

pliance socket [1-3].

7.2 Connecting pneumatic tools

If the compressed air module [1-2] (496141)

is installed, the automatic switch-on function

of the mobile dust extractor also works in

combination with pneumatic tools.

We also recommend installing the VE service

unit (495886). The service unit filters and lu-

bricates the compressed air and enables an

adjustment of the air pressure. An IAS

adapter (454757) is available to connect Fes-

tool pneumatic tools to the IAS system.

The operating pressure of the tool must be

6 bar for the automatic switch-on unit to

function correctly.

7.3 Adjusting the suction power

You can use the suction power adjuster [1-8]

to adapt the machine suction power to differ-

ent applications.

7.4 Applying the brake

Folding out the black brake lever [1-12] pre-

vents the mobile dust extractor from rolling.

To achieve this, lift the front end of the mo-

bile dust extractor slightly and push the

black brake lever downwards until it latches

into place. Push the green lever [1-11] again

to release.

7.5 Temperature cut-out

To prevent overheating, a temperature cut-

out switches the mobile dust extractor off

when it reaches a critical temperature.

Switch off the mobile dust extractor and

allow to cool for about 5 minutes.

If the mobile dust extractor will not switch

on again, please contact a Festool service

workshop.

8 Working

8.1 Handling

Hose store:

after finishing work, you can

feed the suction hose through the recess [4-

3] and place it in the hose store. You can do

the same with the mains cable through the

other recess [4-2].

SysDoc Systainer attachment system:

Systainer can be attached to the storage

area via the two slides [4-1].

8.2 Extracting dry materials

The filter element will become damp when

fluids are extracted. A damp filter element

will clog more quickly when dry materials are

extracted. Therefore, dry the filter element

before extracting dust or replace the damp

filter with a dry one.

8.3 Extracting fluids

Before extracting fluids, remove the filter or

disposal bag (see chapter 9.1). We recom-

mend using a special wet filter.

WARNING

Risk of injury from tools starting up un-

expectedly

Before setting the switch to the "AUTO" or

"MAN" position, make sure that the con-

nected tool is switched off.

WARNING

Risk of injury

Observe the maximum connected loads

for the appliance socket (see chapter

"Technical data").

Make sure that the power tool is switched

off before connecting or disconnecting.

WARNING

Risk of injury

Make sure that the pneumatic tool is

switched off before connecting or discon-

necting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool CT 36 E HEPA CLEANTEX Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info