Bedienungsanleitung Festool CTH 48 E a (Seite 22 von 122) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

499167

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

CTH

Open the locking clips

[2-2]

and remove

the top section of the machine

[2-1]

Turn the top section of the machine so

that the main filter

[9-1]

is facing up-

wards (Fig.

[9]

Remove the two safety bolts

[9-3]

on the

lever

[9-4]

using a screwdriver.

Fold over the lever

[9-4]

and remove the

retainer

[9-2]

with the main filter.

Insert the retainer with the main filter in

the safety bag supplied.

Remove the main filter from the retainer.

Remove the retainer from the safety bag.

Close and dispose of the safety bag in ac-

cordance with statutory regulations.

Clean any dust deposits from the area be-

hind the main filter.

Insert a new main filter in the frame.

Insert the retainer

[9-2]

with the main fil-

ter and fold over the lever

[9-4]

until it

engages in position.

Tighten the safety screws

[9-3]

Replace the top section

[2-1]

and close

the locking clips

[2-2]

9.2 Emptying the dust container

The dust container

[2-3]

can be emptied

once the top section has been removed.

After extracting fluids, clean the fill level

sensors

[10-1]

regularly with a soft cloth

and inspect for damage.

10 Accessories

Use only original Festool accessories and

Festool consumable material intended for

this machine because these components are

designed specifically for the machine. Using

accessories and consumable material from

other suppliers will most likely affect the

quality of your working results and limit any

warranty claims. Machine wear or your own

personal workload may increase depending

on the application. Protect yourself and your

machine, and preserve your warranty claims

by always using original Festool accessories

and Festool consumable material!

The order numbers for the accessories and

filters can be found in the Festool catalogue

or on the Internet at "www.festool.com".

10.1 Modules

The following modules for upgrading the mo-

bile dust extractor are available in the acces-

sories programme. Modules must be fitted to

the module slot

[1-3]

by an authorised ser-

vice workshop:

– Compressed air module,

– Socket module with permanent power sup-

ply,

– Socket module with automatic switch-on

unit (not suitable for GB 110 V version),

– Energy box module (EAA) for using the au-

tomatic switch-on unit on the EAA.

You can find more detailed information on

the modules at "www.festool.com".

11 Disposal

Do not throw the tool in your household

waste!!

Dispose of machines, accessories

and packaging at an environmentally re-

sponsible recycling centre. Observe the valid

national regulations.

EU only:

European Directive 2002/96/EC

stipulates that used electric tools must be

collected separately and disposed of at an

environmentally responsible recycling cen-

tre.

12 Warranty

We offer a warranty for material and produc-

tion defects for all our tools in accordance

with the locally applicable legal provisions,

but for a minimum of 12 months. Within the

EU member states, the warranty period is 24

months (verification through invoice or deliv-

ery note). Damage caused by the operator,

natural wear, overloading, incorrect handling

or through the use of the equipment not

specified in the operating manual, or damage

which was known at the time of purchase, is

not covered by the warranty. Furthermore,

damage caused by the use of non-original

accessories and consumable materials (e.g.

sanding pads) is also excluded.

NOTE

Motor damage

Never operate the extractor without a fil-

ter element fitted as the motor may be-

come damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool CTH 48 E a Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info