Bedienungsanleitung Festool CTL 33 LE SG (Seite 15 von 70) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

499170

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

- A hose coupling (1.10) (487072) can be

plugged into the opening (1.7). The suc-

tion hose is connected to the tool from

above with the hose coupling. Alterna-

tively, a hose clip (452998) can be ﬁ tted

for coiling the suction hose.

- The push handle (2.11) (452921; supplied

ready with CTL 44 and CTL 55) makes the

vacuum cleaner easier to move. Acces-

sories (e.g. vacuum accessories) can be

ﬁ xed to the push handle batten (2.9).

- An air blast is obtained by inserting a suc-

tion hose in the blast opening (2.7).

5.1 Vacuuming dry materials

A ﬁ lter bag must be used without

exception when evacuating noxious

substances!

Before using the vacuum cleaner to evacu-

ate dry substances, a ﬁ lter bag must al-

ways be inserted in the container. Then the

evacuated material can be disposed of eas-

ily. The ﬁ lter element becomes damp after

evacuating liquids. A damp ﬁ lter element

suffers more wear and tear if it is used for

dry materials. Accordingly, the ﬁ lter ele-

ment should be dried or replaced with a dry

one before dry operation.

5.2 Vacuuming liquids

Do not evacuate combustible liquids!

If foam or liquid escapes, stop work

immediately and empty the dirt con-

tainer.

The ﬁ lter bag has to be removed before

evacuating liquids. We recommend use of a

special wet ﬁ lter. When the maximum ﬁ lling

level is reached, a bag-full indicator (2.12)

automatically interrupts extraction.

6 After ﬁ nishing work

- Switch off the cleaner and pull the Plug of

the mains lead out of the Plug socket.

- Wind up the mains lead (2.6).

- Empty dirt tank.

- Clean the vacuum cleaner inside and out-

side by suction and wiping.

- Deposit the appliance in a dry room, safe

from unauthorised use.

7 Maintenance and care

Always remove the power supply

plug from the socket before carrying

out any work on the machine.

All maintenance and repair work

which requires the motor casing to

be opened may only be carried out

by an authorised service centre.

A safety test is to be carried out at least once

a year by the manufacturer or an instructed

person, e.g. for possible damage to the ﬁ l-

ter and leaks in the appliance, and to ensure

that the control devices are functioning.

If the user services the appliance, it must be

dismantled, cleaned and serviced, as far as

possible without any danger to the mainte-

nance staff and other persons. Appropriate

measures include decontamination before

dismantling, locally ﬁ ltered forced ventila-

tion on the dismantling site, cleaning the

service area, and suitable personal safety

equipment.

8 Accessories, ﬁ lter

The accessory and ﬁ lter order number can

be found in your Festool catalogue or on the

Internet under “www.festool.com”.

9 Warranty

Our equipment is under warranty for at

least 12 months with regard to material or

production faults in accordance with na-

tional legislation. In the EU countries, the

warranty period is 24 months (an invoice

or delivery note is required as proof of

purchase). Damage resulting from, in par-

ticular, normal wear and tear, o-verloading,

improper handling, or caused by the user

or other damage caused by not following

the operating instructions, or any fault ac-

knowledged at the time of purchase, is not

covered by the warranty. Damage caused

by the use of non-original accessories and

consumable material (e.g. sanding pads)

is also excluded. Complaints will only be

acknowledged if the equipment has not

been dismantled before being sent back to

the suppliers or to an authorised Festool

customer support workshop. Store the

operating instructions, safety notes, spare

parts list and proof of purchase in a safe

place. In addition, the manufacturer‘s cur-

rent warranty conditions apply.

Note

We reserve the right to make changes to

the technical data contained in this infor-

mation as a result of ongoing research and

development work.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool CTL 33 LE SG Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info