Bedienungsanleitung Festool CTM 26 E (Seite 14 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

499155

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

CTM

4Intended use

The mobile dust extractors are designed for ex-

tracting hazardous dusts with limit values up to 0,1

mg/m³ and wood dust in accordance with dust class

M as per IEC 60335-2-69.

The mobile dust extractors are designed to extract

water

as well as for heavy-duty applications and industri-

al use in accordance with EN 60335-1 and EN

60335-2-69.

The user is liable for improper or non-in-

tended use.

5 Safety instructions

Warning! Read all safety warnings and all in-

structions.

Failure to follow the warnings and in-

structions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future ref-

erence.

– The device is not intended for use by persons (in-

cluding children) with limited physical, sensory

or mental ability or without sufficient experience

and/or knowledge, unless they are supervised by

a person responsible for their safety or have been

instructed on how to use the device. Children

should always be supervised to ensure that they

do not play with the device.

–

Warning:

machine may contain hazardous dust.

Only authorised qualified specialists with suit-

able protective equipment may perform mainte-

nance, empty the container and change the filter.

– Always operate with the filter system installed!

– Always use suitable protective equipment!

– If intact following a visual inspection, work in a

dry environment according to instructions!

When extracting large quantities of oak or

beech wood dust or dust that exceeds the

permitted limit values, only extract from a

single machine (electric or air tool).

–

Risk of explosion and fire hazard: do not extract

sparks or hot dust, flammable or explosive dust

(e.g. magnesium, aluminium, petrol, thinner,

with the exception of wood), aggressive fluids/

solids (e.g. acid, leach, solvent).

– Observe all national safety regulations as well as

the material manufacturer's specifications!

– Always use the socket on the machine for the

purpose specified!

– Do not lift or transport using a crane hook or lift-

ing gear!

6Operation

6.1 Initial operation



Open the locking clips

[2-2]

and

remove the top section of the machine

[2-1]



Remove the accessories from the dust contain-

[2-3]

and the packaging!



Insert a filter or disposal bag in the dirt trap (see

chapter 7.7 and 7.8).



Replace the top section

[2-1]

and close the

locking clips

[2-2]



Attach the cable holder to the rear of the mobile

dust extractor (see Fig.

[3]



Connect the suction hose to the machine.

6.2 Switch on/off



Insert the plug into an earthed socket.

The switch

[1-11]

serves as an on/off switch.

Switch position "0"

Appliance socket

[1-4]

is disconnected from the

power, mobile dust extractor is switched off.

"MAN" switch position

Appliance socket

[1-4]

is connected to the power,

the mobile dust extractor starts.

"Auto" switch position

Appliance socket

[1-4]

is connected to the power,

the mobile dust extractor starts when the connect-

ed tool is switched on.

WARNING

Unauthorised voltage or frequency!

Risk of accident



The mains voltage and the frequency of the pow-

er source must correspond with the specifica-

tions on the machine's name plate.



In North America, only Festool machines with

the voltage specifications 120 V/60 Hz may be

used.

WARNING

Risk of injury from tools starting up unexpectedly



Before setting the switch to the "AUTO" or

"MAN" position, make sure that the connected

tool is switched off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool CTM 26 E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info