Bedienungsanleitung Festool CTM 55 E (Seite 13 von 78) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

499152

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

knowledge, unless they are supervised

by a person responsible for their safety

or have been instructed on how to use

the machine. Children should always be

supervised to ensure that they do not play

with the machine.

- If used to extract dusts with LTL values or

large quantities of beech or oak sawdust,

only one dust source (electric or air tool)

may be connected.

- The appliance may be operated only in an

adequately ventilated space (in compliance

with national industrial safety provisions).

- Do not suck in any sparks or hot chip-

pings.

- With the exception of wood dust, do not

suck in any ﬂ ammable or explosive dusts

such as magnesium, aluminium etc. - Risk

of explosion!

- Do not use to extract ﬂ ammable or explo-

sive liquids (e.g. petrol, thinners) - Risk

of explosion!

- Do not use to extract aggressive liquids/

dry materials (e.g. acids, alkalis, sol-

vents).

- Remove plug from mains socket when not

in use and before maintenance work.

- Do not pull plug out of mains socket by

its cable.

- Protect the cable against heat, oil and

sharp edges.

- Check the plugs and cables regularly and

have them replaced by an expert if dam-

aged.

- Do not leave devices out in the rain.

- Do not lift or carry the devices by their

handles using a crane hook or lifting gear.

- The device may only be used by persons

who have been trained in its use and who

are authorised to do so.

- If noxious dusts have been extracted,

the vacuum cleaner and all accessories

must be completely cleaned (inside and

outside) by suction and wiping, before re-

moval from the contaminated area. Parts

that cannot be completely cleaned are to

be packed for transport in a plastic bag

with an airtight seal. The suction opening

(1.14) must be sealed with the blanking

plug (1.13) for transport purposes.

- For safety reasons, only operate the ma-

chine using a totally earthed socket.

3 Appliance preparation and initial

operation

The accessories are delivered horizontal in

the container (2.10), and must be removed

prior to initial operation.

3.1 Power supply

The line voltage and frequency must

correspond with the data on the rat-

ings plate!

Make sure that the vacuum cleaner is

switched off when you plug the power cable in.

The antistatic system (AS)

Friction in the suction hose causes electro-

static charges which can result in unpleas-

ant electric shocks for the operator. In order

to conduct these static charges to earth,

the extraction units are provided with an

antistatic system as a standard feature.

However, antistatic hoses and accessories

have to be used in this case. The antistatic

function will only work if the plug is plugged

into a totally earthed socket.

3.2 On/off switch (1.3)

In position 0 the vacuum cleaner is switched

off and the appliance plug socket (1.7) is

dead. Before switching on, the rotary knob

(1.2) must be adjusted to the diameter of

the connected suction hose.

Two modes of operation are possible:

a) Switch position „MAN“

The appliance plug socket is dead.

The cleaner motor starts immediately.

b) Switch position „Auto“

The appliance plug socket is live.

Before turning the switch to the

„Auto“ position, ensure that the

tool connected to the appliance plug

socket is switched off.

The cleaner motor starts only when the tool

connected to the appliance plug socket is

switched on.

3.3 Suction force regulator (1.4)

The suction force regulator can be used to

vary the suction capacity. This permits a

precise adaptation to different substances

to be picked up.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool CTM 55 E Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info