Bedienungsanleitung Festool DF 500 Q - Domino - 2021 (Seite 16 von 86) (Alle Sprachen)

778805

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

Prior to processing the final workpiece, it is advis-

able to optimise the dowel-hole depth, width and

diameter using a sample workpiece.

Please observe the following rules when

working:

- Always secure the workpiece in such a manner

that it cannot move while being sawed.

- Always hold the Domino dowel jointer with both

hands at the motor housing and at the additional

handle. This reduces the risk of injury and is a

prerequisite for precise work.

- Close the clamping lever for jointing height

adjustment [2‑3] and the clamping lever for

the angle guide [1‑5] so that accidental release

during operation is impossible.

- Adapt the feed rate to the jointer bit diameter

and material. Work with a constant feed rate.

- Only lay the Domino dowel jointer aside when

the jointer bit has come to a complete standstill.

- Use the machine only with the guide frame

mounted.

Procedure

Proceed as follows to create a dowelled joint:

- Select a Domino dowel and insert a match-

ing jointing bit in the Domino dowel jointer

(Chap. 7.1).

- Set the jointing depth (Chap. 7.2). The jointing

depth must be at least 3 mm smaller than the

workpiece thickness so that the dowelled joint

is supportable.

- Set the jointing height to correspond to the

workpiece thickness (Chap. 7.3).

- Mark the areas on the workpiece that belong

together [10‑1] so that you will be able to join

them correctly again once you have cut the

dowel holes.

- Position the two workpieces to be joined against

one another and mark the desired positions of

the dowels with a pencil [10‑2].

- Set the desired dowel-hole width (Chap. 7.5).

Our recommendation: Cut the first hole without

play (dowel-hole width = Domino dowel width),

and the remaining dowel holes to the next larg-

est dowel-hole width (Fig. 10). The first dowel

hole therefore serves as a reference dimension,

whereas the remaining dowel holes have toler-

ance for manufacturing inaccuracies.

- Cut the dowel holes:

a) the first dowel hole by placing the stop latch

at the side edge of the workpiece,

b) the following dowel holes according to the

pencil markings made beforehand and the

scale of the viewing window [10‑3].

9 Maintenance and care

Always remove the power supply plug

from the socket before carrying out any

work on the machine.

All maintenance and repair work which

requires the motor casing to be opened

may only be carried out by an authorised

service centre.

Customer service and repair. Only

through manufacturer or service work-

shops: Please find the nearest address

at: www.festool.com/Service

EKAT

235

Use only original Festool spare parts!

Order No. at: www.festool.com/Service

The Domino dowel jointer is to a large extent

maintenance-free. However, we recommend an

annual inspection and/or a check after approx.

100 operating hours at an authorised customer

service workshop. This is for the safety of the user

and the value stability of the Domino dowel jointer.

Always keep the machine and the ventilation slots

clean.

Dust deposits must be removed from the

guides [4‑3]. Oil the guides regularly and lightly

with resin-free oil (e.g. sewing machine oil).

To secure the clamp lever (see Fig. 6b):

- Remove the clamp lever and tighten the hexagon

screw.

- Attach the clamp lever to the hexagon screw

again.

The tool is fitted with special motor brushes with

an automatic cut-out. When the brushes become

worn the power supply is shut off automatically

and the tool comes to a standstill.

10 Accessories, tools

For your own safety, use only original

Festool accessories and spare parts.

Festool offers extensive accessories that enable

you to use your machine effectively for a wide

variety of applications, e.g.: routing circle, guide

rails with rows of holes, routing aid, router base

for bench-mounted use.

The accessory and tool order number can be found

in the Festool catalogue or on the Internet under

„www.festool.com“.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool DF 500 Q - Domino - 2021 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info