Bedienungsanleitung Festool DF 700 EQ - Dominio XL - 2021 (Seite 13 von 103) (Alle Sprachen)

778804

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

DF 700 EQ

5.2 Machine-related safety instructions

–

Hold power tool by insulated gripping surfaces,

because the cutter may contact its own cord.

Cutting a "live" wire may make exposed metal

parts of the power tool "live" and could give the

operator an electric shock.

–

The tools must be rated for at least the speed

marked on the power tool.

Tools running over

rated speed can fly apart and cause injury.

–

Use the machine only with the guide frame

mounted.

The guide frame protects the user

against broken-off parts of the jointer bit and ac-

cidental contact with the jointer bit.

–

Only cutters provided by Festool for this pur-

pose may be mounted on the power tool.

The

use of other cutters is prohibited due to the in-

creased risk of injury.

–

Never use dull or damaged mortising bits.

Dull

or damaged mortising bits can cause the tool to

lurch sideways unexpectedly and lead to a loss of

control of the power tool.

–

Do not resharpen cutters more than twice.

Re-

sharpened cutters may affect the precision of the

cutting results.

–

Do not operate the tool if the spring-loaded

fence does not return to its forward rest posi-

tion.

The fence covers the mortising bit and pre-

vents accidental contact. If the slides of the fence

do not move freely, have the tool serviced imme-

diately.

5.3 Emission levels

Levels determined in accordance with EN 60745 are

typically:

Vibration emission value a

(vector sum for three

directions) and uncertainty K measured in accor-

dance with EN 60745:

The specified emissions values (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary esti-

mates regarding vibration and noise loads during

operation.

– They represent the primary applications of the

power tool.

Increase possible for other applications, with other

insertion tools or if not maintained adequately. Take

note of idling and downtimes of machine!

6Operation

Always switch the machine off before con-

necting or disconnecting the mains power

cable!

Connecting and detaching the mains power cable

[1-17]

see Fig.

[2]

The switch

[1-4]

is an on/off switch (I = ON, 0 =

OFF).



Peel off the protective film from the bottom of

the guide frame

[3-4]



Remove the transport safety device

[1-18]

7 Settings

7.1 Electronics

The machine features full-wave phase control elec-

tronics with the following features:

Smooth start-up

The electronically controlled smooth start-up en-

sures that the machine starts up jolt-free.

Constant speed

The motor speed remains constant through electron-

ic control to ensure a uniform cutting speed even

Sound pressure level L

= 83 dB(A)

Noise level L

= 94 dB(A)

Measuring uncertainty allow-

ance K = 3 dB

CAUTION

Operating noise

Damage to hearing



Use ear protection!

Handle a

< 2,5 m/s

Uncertainty K = 1,5 m/s

WARNING

Unauthorised voltage or frequency!

Risk of accident



The mains voltage and the frequency of the pow-

er source must correspond with the specifica-

tions on the machine's name plate.



In North America, only Festool machines with

the voltage specifications 120 V/60 Hz may be

used.

WARNING

Risk of injury, electric shock



Always pull the mains plug out of the socket be-

fore performing any type of maintenance on the

machine!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool DF 700 EQ - Dominio XL - 2021 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info