Bedienungsanleitung Festool ds 400 q (Seite 6 von 34) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

389678

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Technical data DS 400 Q/DS 400 EQ

Wattage 220 W

Speed 13,000/6,000 - 13,000 rpm

Power stroke 26,000/12,000 - 26,000 rpm

Sanding stroke 2.0 mm

Sanding base 100 x 150 mm (delta form)

Weight 1.1 kg

Degree of protection

/II

The speciﬁ ed illustrations can be found at the

beginning of the operating instructions.

1 Safety instructions

Before using the machine, read the

enclosed safety instructions and these

operating instructions carefully and

thoroughly.

Save all enclosed documents and pass the ma-

chine with all these documents only.

Always wear protective goggles because

of possible dangers when sanding.

The manufacturer’s handling and processing

instructions must be observed without fail if

explosive or self-igniting dusts are likely to

occur during sanding.

Harmful/toxic dusts can occur during your work

(e.g. lead-containing paint, some types of wood

and metal). Contact with these dusts, especial-

ly inhaling them, can represent a hazard for

operating personnel or persons in the vicinity.

Comply with the safety regulations that apply

in your country. Connect the electric power tool

to a suitable extraction system.

To protect your health, wear a P2 pro-

tective mask.

2 Correct usage

The sanders are designed for sanding wood,

plastic, composite materials, paint/varnish,

ﬁ lling material and similar materials.

Metal and materials with an asbestos content

must not be processed with these tools.

The machine is particularly suitable for pro-

cessing smaller surfaces and overhead work

because of its size, its weight and its output.

The machines must not be damp nor operated

in a damp environment for electrical safety

reasons.

The machines may only be used for dry san-

ding.

The user bears sole responsibility for

any damage or accidents resulting from

incorrect use.

3 Noise and vibration information

Typical values established in compliance with

EN 60745:

Sound pressure level 70 dB(A)

Sound-power level 81 dB(A)

Measuring uncertainty allowance K = 4 dB

Measured acceleration <2.5 m/s²

4 Electrical connection and operation

The mains voltage must correspond with

the voltage on the rating plate!

See Fig. 3 for connection and disconnection of

the power cable.

Always switch the machine off be-

fore connecting or disconnecting

the mains lead!

The switch (1.1) acts as an ON/OFF switch

(I = ON/0 = OFF).

5 Electronic control

The DS 400 EQ has an electronic control

with which the rotational speed can be

varied step-free.

This allows the sanding speed to be

adapted to the optimum level according

to the material concerned (see Chapter

8).

The speed is set using the rotary control button

(2.1).

6 Dust extraction

Dust extractors prevent large accu-mu-

lations of dust in the air in the working

environment and dirt collecting in the

workplace.

6.1 Inboard extraction

The machines are ﬁ tted with inbuilt extraction

as standard. The sanding dust is extracted

through suction openings in the sanding base

(1.8) and trapped in the turbo-ﬁ lter (1.5). The

turbo-ﬁ lter has to be changed when it is so full

of dust that the extraction power diminishes.

Inserting a turbo-ﬁ lter

- Push the front cardboard section of the tur-

bo-ﬁ lter with the sealing lip (2.3) onto the

extraction nozzle (2.2) of the ﬁ lter holder

- Insert rear cardboard section with slot (2.4)

onto the retaining strip (2.5) of the ﬁ lter hol-

der

- Push the ﬁ lter holder with its opening (1.3)

as far as it will go onto the extraction nozzle

(1.2) of the machine and clamp tight by tur-

ning rotary knob (1.4).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool ds 400 q Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info