Bedienungsanleitung Festool ets 150 3 eq c (Seite 3 von 16) (Englisch, Französisch)

389494

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

21 Check for misalignment or binding of

moving parts, breakage of parts, and any

other condition that may affect the tools

operation. If damaged, have the tool

serviced before using. Many accidents are

caused by poorly maintained tools.

22 Use only accessories that are

recommended by the manufacturer for

your model. Accessories that may be suitable

for one tool, may become hazardous when used

on another tool.

Service

23 Tool service must be performed only by

qualified repair personnel. Service or

maintenance performed by unqualified personnel

could result in a risk of injury.

24 When servicing a tool, use only identical

replacement parts. Follow instructions in

the Maintenance section of this manual. Use

of unauthorised parts or failure to follow

Maintenance instructions may create a risk of

electric shock or injury.

Symbols

V Volts

A Amperes

Hz Hertz

W Watt

Alternating current

No load speed

Class II Construction

rpm Revolutions per minute

spm Strokes per minute

Ø Diameter

Intended use

The sanders are designed for sanding wood,

plastic, composite materials, paint / varnish,

filling material and similar materials.

Metal and materials with an asbestos content

must not be processed with these tools.

The machines must not be damp nor operated

in a damp environment for electrical safety

reasons. The machines may only be used for

dry sanding.

Technical data ETS 150/3 EQ ETS 150/5 EQ

Wattage W 310 310

No load speed rpm 6 000 - 10 500 6 000 - 10 500

No. of strokes spm 12 000 - 21 000 12 000 - 21 000

Sanding stroke mm (in.) 3.0 (0.12) 5.0 (0.20)

Sanding base, Ø mm (in.) 150 (5.9) 150 (5.9)

Weight kg (lbs) 1.8 (4.0) 1.8 (4.0)

Safety level

UL 745, CSA C22.2 No. 745

The user bears sole responsibility

for any damage or accidents resulting from

incorrect use.

Electrical connection and operation

The mains voltage must correspond with the

voltage on the rating plate!

See the following figure for connection and dis-

connection of the power cable.

Always switch the machine off

before connecting or disconnecting the power

cable!

Various dust created by power

sanding, sawing, grinding, drilling and other

construction activities contains chemicals

known (to the State of California) to cause

cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and

other masonry products, and

•arsenic and chromium from chemically-

treated lumber.

The risk from these exposures varies,

depending on how often you do this type of

work.

To reduce your exposure to these

chemicals: work in a well

ventilated area, and work with

approved safety equipment, such

as dust masks that are specially

designed to filter out microscopic

particles.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool ets 150 3 eq c Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info