Bedienungsanleitung Festool ets 150 5 eq plus (Seite 5 von 16) (Englisch, Französisch)

390120

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Choice and installation of the

grinding disks

The appliance can be fitted with three grinding

disks (5.1) of different hardness depending on

the surface to be treated.

- Hard: coarse grinding on surfaces, grinding

at edges.

- Soft: universal for coarse and fine grinding,

for flat and curved surfaces.

- Super-soft: fine grinding on formed parts,

curves, radii. Do not use on edges!

The grinding disks and the tool-holding fixture

on the appliance are equipped with a positive

holder (6.1).

Make sure the grinding disk is

correctly positioned before screwing it tight.

Working with the machine

Never overload the tool by using

too much pressure! The best sanding results

are achieved when applying moderate pressure.

The ETS 150/3 EQ gives the best surface quality

and low abrasion. The ETS 150/5 EQ provides

high abrasion with good surface quality. The

sanding performance and quality depend mainly

on the choice of the right sanding material.

Festool offers the appropriate sanding material

for all applications (see Festool catalogue or

on the Internet under "www.festool.com").

We recommend the following settings on the

rotary control (2.3) for electronic machines:

5 - 6

- sanding with max. drive

- sanding old paint

- sanding wood and veneer prior to painting

- interim sanding of paint on surfaces

4 - 5

- sanding of thinly applied primer

- sanding of wood with sanding vlies

- sanding edges on wooden parts

- smoothing primed wooden surfaces.

3 - 4

- sanding full wooden and veneer edges

- sanding in the grooves/rebates of windows

and doors

- interim paint sanding on edges

- pre-sanding natural wood windows with

sanding vlies

- smoothing wood surfaces with sanding felt

prior to staining

- rubbing down stained surfaces with sanding

vlies

- rubbing down or removing excess lime paste

with sanding vlies

2 - 3

- interim paint sanding on stained surfaces

- cleaning natural wood window grooves with

sanding felt

1 - 2

- sanding stained edges

- sanding thermoplastic synthetics

Maintenance and care

Any maintenance or repair work

requiring the motor housing to be opened may

only be carried out by an authorised service

workshop. Maintenance or repair work carried

out by an unauthorised person can lead to the

wrong connection of the power leads or other

components, which in turn can lead to accidents

with serious consequences.

Always remove the plug from the

mains supply socket before carrying out any

work on the machine!

Always keep the machine and the ventilation

slots clean.

Sanding base brakes

The sanding base is braked by a collar (6.2) in

order to prevent any uncontrolled excessive

speed of the sanding base. Because the collar

wears down in the course of time, it has to be

replaced by a new one (order no. 453 388) as

soon as there is any reduction in the braking

effect.

Accessories, tools

For safety reasons, only use ori-

ginal Festool accessories and tools!

The accessory and tool order number can be

found in the Festool catalogue or on the Internet

under “www.festool-usa.com”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool ets 150 5 eq plus Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info