Bedienungsanleitung Festool HK 55 EQ (Seite 27 von 143) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

778533

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

10 Accessories

Refer to the Festool catalogue for the order

numbers of accessories and tools or find them

online at www.festool.co.uk.

In addition to the accessories described,

Festool also provides a comprehensive range of

system accessories that allow you to use your

saw more effectively and in diverse applica

tions, e.g.:

• Parallel stop, extension table PA-HKC 55

• Kickback stop FS-RSP

• Parallel stop FS-PA and guide extension

FS-PA-VL

• Side-mounted cover, false joint ABSA-TS

10.1 Saw blades, other accessories

In order to saw different materials quickly and

cleanly, Festool offers saw blades for all appli

cations and these are specially designed for

your Festool saw.

10.2 Guide rail

The guide rail enables you to make clean, accu

rate cuts while simultaneously protecting the

surface of the workpiece from damage.

In conjunction with the extensive range of ac

cessories, exact angled cuts, mitre cuts and fit

ting work can be completed with the guide sys

tem. The option of attaching the guide rail se

curely using clamps [8-7] ensures safer work

ing conditions.

► Adjust the guide play between the saw table

and the guide rail using the two adjustable

jaws [8-8].

Bed in the splinter guard before using the

guide rail for the first time[8-5]:

► Position saw with the entire guide plate at

the rear end of the guide rail.

► Swivel saw to 0° position and set maximum

cutting depth.

► Switch on saw.

► Slowly drop the splinter guard across the

entire length without setting down.

The edge of the splinter guard now corresponds

exactly to the cutting edge.

10.3 Cross cutting guide rail

The cross cutting guide rail is designed for saw

ing wood and panel materials.

It enables precise and clean cuts, in particular

angled cuts can be performed simply and with

repeat accuracy. The saw automatically moves

back to the initial position after the sawing

process.

Observe the instructions in the operating man

ual for the FSK cross cutting guide rail

11 Environment

Do not dispose of the device in the

household waste! Recycle devices, ac

cessories and packaging. Observe appli

cable national regulations.

EU only: In accordance with the European Di

rective on waste electrical and electronic

equipment and implementation in national law,

used power tools must be collected separately

and handed in for environmentally friendly re

cycling.

Information on REACH: www.festool.com/reach

12 General information

12.1 Information on data privacy

The power tool contains a chip which automati

cally stores machine and operating data. The

data saved cannot be traced back directly to an

individual.

The data can be read in a contactless manner

using special devices and shall only be used by

Festool for fault diagnosis, repair and warranty

processing and for quality improvement or en

hancement of the power tool. The data shall not

be used in any other way without the express

consent of the customer.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool HK 55 EQ Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info