Bedienungsanleitung Festool HK132 (Seite 19 von 114) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

573118

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

ance with EN 60 745:

= 3.1 m/s

Uncertainty K = 1.5 m/s

The speciﬁ ed emissions values (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary esti-

mates regarding vibration and noise loads dur-

ing operation.

– They represent the primary applications of the

power tool.

Increase possible for other applications, with other

insertion tools or if not maintained adequately.

Take note of idling and downtimes of machine!

6 Commissioning and Operation

WARNING

Risk of accident if the machine is operated us-

ing unauthorised voltages or frequencies.

 The mains voltage and the frequency of the

power source must correspond with the

speciﬁ cations on the machine’s name plate.

 In North America, only Festool machines with

the voltage speciﬁ cations 120 V/60 Hz may

be used.

WARNING

Risk of accident, electric shock

 Always pull the plug out of the socket before

performing any type of work on the machine.

Adjustment of the riving knife

WARNING

Risk of injury, if the riving knife is not correctly

adjusted.

The riving knife [1-11] must always be used for

safety reasons. The riving knife prevents the saw

blade from becoming jammed when making length-

wise cuts.

Loosen screw [1-12], adjust the riving knife [1-11]

and retighten the screw (see ﬁgure).

Check the function of the swinging guard [1-9].

Switching On/Off

Switching On:

Press the safety button [1-14].

Press the on-off switch [1-13] and hold depressed.

Note: The on-off switch cannot be locked on.

Switching Off:

Release the on-off switch [1-13].

7 Adjustment

WARNING

Risk of accident, electric shock

 Always pull the plug out of the socket before

performing any type of work on the machine.

7.1 Electronic Motor Control

Soft start

The electronically-controlled soft start ensures that

the tool starts without jerking and requires only a

small starting current (weaker fuses required).

Constant speed

The motor speed is electronically stabilised. This

enables a constant cutting speed even under a

heavy load.

Overload protection

In cases of extreme overload (rip cutting, use of

blunt saw blades) the power consumption may con-

siderably exceed the permissible rated value. In this

case an electronic overload device protects the mo-

tor from burning out. The motor is hereby switched

of by an “electronic safety clutch” and re-starts as

soon as the load is removed.

Temperature protection

Extreme overload in continuous operation causes

the motor to heat up. An electronic temperature

monitoring device is ﬁ tted to prevent overheat-

ing (motor burn-out). The electronic safety device

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool HK132 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info