Bedienungsanleitung Festool HKC 55 EB (Seite 21 von 143) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

778531

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

backwards, cutting whatever is in its path.

Be aware of the time it takes for the blade

to stop after switch is released.

Function of the guide wedge [1-5]

a. Use the correct saw blade for the guide

wedge, where possible. The function of the

guide wedge is restricted if using saw

blades with a thicker blade core. To en

sure that the guide wedge functions prop

erly, make sure the blade core of the saw

blade is thinner than the guide wedge and

that the tooth width is greater than the

thickness of the guide wedge. Expect in

creased risk of kickback when using a

thicker saw blade.

b. Do not operate the saw if the guide wedge

is bent. Even the slightest problem can

cause the guard to close more slowly.

Further safety instructions

–This electric power tool cannot be instal

led in a work bench. The electric power

tool may become unsafe and cause serious

accidents if installed in benches from other

manufacturers or self-manufactured work

benches.

–Never place your hands into the chip ejec

tor. You may injure yourself on rotating

parts.

–Use suitable detectors to determine if util

ity lines are hidden in the work area or

call the local utility company for assis

tance. Aontact with electric lines can lead

to fire and electric shock. Damaging a gas

line can lead to explosion. Penetrating a

water line causes property damage or may

cause an electric shock.

–Wait until the power tool stops completely

until placing it down. The tool can become

entangled and lead to a loss of control of

the power tool.

– Do not use the machine for overhead work.

–Harmful/toxic dust may be produced dur

ing your work (e.g. paint containing lead,

certain types of wood and metal). Inhaling

or coming into contact with this dust may

represent a hazard for operating personnel

or persons in the vicinity. Comply with the

safety regulations that apply in your coun

try.

Wear a P2 dust mask to protect your

health.

Ensure that enclosed spaces are adequately

ventilated and, if necessary, connect a mobile

dust extractor.

–

Wear suitable personal protective equip

ment: Ear protection, protective goggles,

dust mask for work that generates dust,

protective gloves for working with rough

materials and for changing tools.

–Harmful/toxic dust may be produced dur

ing your work (e.g. paint containing lead,

certain types of wood or metals). Contact

with or inhalation of this dust may pose a

risk for the operating personnel or persons

in the vicinity. Comply with the safety regu

lations that apply in your country.

– Check whether there are any signs of dam

age to the housing components, such as

cracks or stress whitening. Have any dam

aged components repaired before using the

power tool.

–Do not use power supply units or third-

party battery packs to operate cordless

power tools. Do not use third-party charg

ers to charge the battery packs. The use of

accessories not expressly authorised by the

manufacturer can result in electric shocks

and/or serious accidents.

2.3 Residual risks

In spite of compliance with all relevant design

regulations, hazzards while operating the ma

chine still occur e.g.:

– Touching the saw blade in the area of the

front opening below the saw table,

– Touching the parts of the saw blade that

protrude below the saw table while cutting,

– Touching rotating parts from left and right

sides: saw blade, clamping flange, flange

screw.,

– Kickback of machine due to jamming in the

workpiece,

– Touching live parts when the casing is

opened and the mains plug is in the socket,

– the flying off of parts,

– the flying off of machine parts from a dam

aged machine,

– noise emission,

– dust emission.

2.4 Sawing aluminium

When sawing aluminium, the following meas

ures must be taken for safety reasons:

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool HKC 55 EB Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info