Bedienungsanleitung Festool HKC 55 EB (Seite 22 von 143) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

778531

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

– Wear protective goggles.

– Connect the power tool to a suitable dust

extractor with an antistatic suction hose.

– Regularly clean dust deposits from the mo

tor housing on the power tool.

– Use an aluminium saw blade.

– When sawing panels, they must be lubrica

ted with petroleum, but thin-walled profiles

(up to 3 mm) can be sawed without lubrica

tion.

2.5 Emission levels

The levels determined in accordance

with EN 62841 are typically:

Sound pressure level LPA = 96 dB(A)

Sound power level LWA = 107 dB(A)

Uncertainty K = 4 dB

CAUTION

Noise generated when working

Risk of damage to hearing

► Use ear protection.

Vibration emission level ah (vector sum for

three directions) and uncertainty K measured in

accordance with EN 62841:

Sawing wood ah ≤ 2.5 m/s2

K = 1.5 m/s2

Sawing aluminium ah ≤ 2.5 m/s2

K = 1.5 m/s2

The specified emission levels (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary

estimates regarding vibration and noise

load during operation.

– They represent the primary applications of

the power tool.

CAUTION

The emission values may deviate from the

specified values. This is dependent on how

the tool is used and the type of workpiece

being machined.

► The actual load during the entire operating

cycle must be evaluated.

► Depending on the actual load, suitable pro

tective measures must be defined in order

to protect the operator.

3 Intended use

Portable circular saw designed for sawing

– wooden materials and wood-based materi

als,

– plaster and cement compoud fibres,

– plastic materials,

– aluminium (only with a special saw blade

for aluminium offered by Festool)

Only use saw blades with the following

dimensions:

– Saw blades in accordance with EN 847-1

– Saw blade diameter 160 mm

– Recommended cutting width 1.8 mm, max.

2.2 mm with restricted function of the guide

wedge

– Location hole 20 mm

– Recommended standard blade thickness

1.2 mm, range of 1.1 to max. 1.25 mm pos

sible

– Suitable for speeds of up to 9500 rpm

Do not use cutting or sanding discs.

Only saw materials for which the saw blade in

question has been designed.

This power tool may only be used by experts or

instructed persons.

The user is liable for improper or non-in

tended use.

This power tool is suitable for use with

BP Festool battery packs of the same voltage

class.

4 Technical data

Cordless circular saw HKC 55 EB

Motor voltage 14.4–18 V

Speed (no-load) 4500 rpm

Inclination 0° to 50°

Cutting depth at 0° 0–55 mm

Cutting depth at 50° 38 mm

Saw blade dimensions

recommended 160 x 1.8 x 20 mm

max. 160 x 2.2 x 20 mm

Weight excl. battery pack 3.4 kg

5 Parts of the device

[1-1] Handles

[1-2] Switch-on lock

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool HKC 55 EB Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info