Bedienungsanleitung Festool IS330EB (Seite 21 von 192) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

573136

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

[4-3] Bevel indicator

[4-4] Cut indicator for 45°

[4-5] Cut indicator for 60°

[4-6] Cut proﬁ le indicator for 0°

[5-1] Oil level indicator

[5-2] Oil feed adjuster

[6-1] Distance screws

[7-1] Guide rail

[7-2] Gripper

[7-3] Angle adjuster

[7-4] Connecting spring

[7-5] Quick clamp

[8-1] Safety snap ring

[8-2] Washer

[8-3] Chain sprocket

[8-4] Spindle

Accessories that are illustrated or described here

are not always included in the scope of delivery.

The speciﬁ ed illustrations can be found at the be-

ginning of the operating instructions.

4 Applications

CAUTION

 Not for use on wood!

 The machine is only suitable for cutting pres-

sure-resistant insulation.

 Various types of chains allow you to select the

right tool for cutting pressure-resistant insula-

tions of any density.

4.1 Description

The IS 330 EB insulation saw is intended for cut-

ting insulation made of wood ﬁ bre and polyure-

thane foam. The machine can make rectangu-

lar cuts and adjustable angle cuts to a depth of

330 mm. A cutting angle as large as 60° can be

set quickly and precisely using two tilting seg-

ments and a clearly legible bevel indicator. The

machine is equipped with a pull-out guide ruler

that can be placed on either side of the runner

and guarantees a straight, accurate cut.

The guide bar can be quickly tilted back 10°. Chain

tension can be comfortably adjusted using a wheel

that is easily accessible from the main handle. A

suitably shaped port for routing away sawdust

keeps the machine clear and can be attached to

a suction hose. During cutting, the chain receives

optimal lubrication from the oil feed pump. Once

turned on, the motor runs smoothly up to maxi-

mum RPM, thanks to an electronic control unit.

The motor is electronically protected. In the event

of an accidental overload, it switches off automati-

cally. If overloaded for a longer period, it switches

to “cooling mode”, during which the machine runs

at a low cooling RPM, and once cooled, it returns

to the normal operating mode. When the machine

is turned off, an electric brake activates, which

signiﬁ cantly shortens the machine’s run-down

time. Depending on the usage, this run-down time

may vary considerably.

4.2 Tool properties

The insulation saw is designed for cutting insu-

lation material. The machine is operated by a

person who holds and guides it using designated

handles; the basic grip is by the front auxiliary

handle and the main handle. Holding the rear aux-

iliary handle is only permitted if there is no danger

of kickback. Any other usage of this machine is

considered improper. The machine is not designed

for cutting wood, felling trees or trimming trees

and bushes. The manufacturer of the machine is

not responsible for any damages caused by its im-

proper use. Risks associated with such use of the

machine are borne solely by the user. The speci-

ﬁ ed use of the machine also includes conform-

ing to the operational, maintenance and repair

conditions prescribed by the manufacturer. This

machine must not be operated by people under

16 years of age.

5 Safety instructions

DANGER

All applicable rules concerning work safety, the

safety guidelines stated in the chapter Safety

Instructions, and all other generally applicable

health and work principles must be adhered to

without exception. The manufacturer is not liable

for any damages caused by unauthorised altera-

tions to this machine.

5.1 General safety instructions

WARNING! Read all safety warnings and

all instructions. Failure to follow the warn-

ings and instructions may result in electric shock,

ﬁ re and/or serious injury.

Save all warnings and instructions for future

reference.

The term „power tool“ in the warnings refers to

your mains-operated (corded) power tool or bat-

tery-operated (cordless) power tool.

5.2 Machine-related safety instructions

- Only for AS/NZS: The tool shall always be sup-

plied via residual current device with a rated

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool IS330EB Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info