573123
16
Zoom out
Zoom in
Vorherige Seite
1/138
Nächste Seite
16
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future
reference.
Never allow children to use the machine.
Before using the machine, make yourself suf-
ciently familiar with the application, setting and
operation of the machine.
5.2 Machine-related safety instructions
Safety precautions
Always use original Festool tools (in accordance
with EN 847-1).
For reasons of safety, the dimensions of the saw
blades should be as follows: saw blade diameter
260 mm, location hole 30 mm, standard blade
thickness 1.8 mm. Using saw blades with differ-
ent dimensions increases the risk of injury for
the user and the machine may become damaged
because the integrated sliding clutch may not
activate correctly.
To guarantee safe clamping of the workpieces,
they must have a minimum length of 200 mm.
Use only correctly sharpened tools without dam-
age or deformation. The maximum rotational
speed specifi ed on the tool must be observed.
Select the saw blade suitable for the material
you wish to work on.
Do not use saw blades made of high-speed
steel.
Do not use spacers or spindle rings.
Ensure the work area has adequate lighting.
Attach the machine securely to the worktop or
a bench.
To minimise the release of dust, the machine
should be connected to a suitable extraction
unit. All dust extraction elements (exhaust
hoods etc.) must be properly set.
Wear suitable personal protective equipment:
ear protection to reduce the risk of hearing loss;
safety goggles; a dust mask to prevent inhalation
of harmful dust; protective gloves when working
with raw materials and when changing tools.
Only transport the tool in suitable packaging.
Maintenance and repair
Replace a tabletop insert if worn.
Only use the machine if all protection devices
are in their correct positions, the machine is in
good condition and has been well maintained.
Faults on the machine, including the separating
guards or the tool, must be reported to main-
tenance staff immediately upon discovery. The
machine must not be used until the fault has
been eliminated.
If the machine is equipped with a laser, ensure
it is always replaced by a laser of the same type.
Repairs must only be made by the laser manu-
facturer or an authorised agent.
Safe work
• Only process material for which the machine
has been approved. Aluminium must only be
sawed with the special saw blades from Festool
designed for this purpose.
Never process material containing asbestos.
Ensure that the fl oor around the machine is
level, clean and free of loose objects (e.g. chips
and offcuts).
Keep hands, fi ngers and arms well away from
the rotating tool. Never reach into the area of
the saw blade behind the stop.
Always assume the correct position before start-
ing work:
- front at the operating end,
- facing the machine,
- next to the cutting line.
Do not remove offcuts or other workpiece parts
from the cutting area while the machine is still
running or before the saw blade stops.
Use a suitable device to support long workpieces
and ensure that they are horizontal.
Never allow another person to hold or support
the workpiece when sawing. Always clamp the
workpiece in a suitable device.
Observe the specifi ed maximum workpiece di-
mensions.
Observe the instructions for lifting and trans-
porting the machine.
Observe the instructions for installing and op-
erating the machine.
Ensure the permissible dimensions of the saw
blade are not exceeded. Never use reducers or
adapters to secure the saw blade on the tool
spindle.
Do not saw wood containing metal parts such
as nails, screws, etc.
Do not apply lateral force to the saw blade.
Always saw only one workpiece at a time. It is
not possible to safely secure several workpieces;
they can displace each other during sawing and
block the saw blade.
If the saw blade is blocked, switch the machine
off immediately and disconnect the mains plug.
Do not remove the jammed workpiece until you
have done this.
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Festool KS120EB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info